Curt KU8L wrote... > Got it. Is this essentially the same as the Nuvicable as detailed in > the files section here?
Yes, you can home-brew your own cable. I've got a couple of the cables that I mentioned, but I also have a few of the mini-B cables and was going to try doing my own level converter one of these days. I think you basically just have to drop the voltage with some diodes and add the 8.2 K resistor to tell the Nuvi to go into FMI mode. I have three Nuvi 350s, so one of these days I will get brave enough to disect one of them and see if I can do a "one cable" connection to the back connector. Hopefully the most difficult part will be opening up the Nuvi, but a magnifying glass will help. > Also..does it make any difference which Software rev the Nuvi > is for ops with the T2? My nuvi is ver 5.00 but I see 6.2 update > is available now. I've updated mine to ver 6.00 with no apparaent problems. You might want to see if anyone has updated to 6.2 before you do it! 73 es cul - Keith VE7GDH -- "I may be lost, but I know exactly where I am!"
