Hi, we asked Peet if they could help us to figure out the problem with the erroneus data.
First answer from Peet was like: We do not know anything about wrong data that might be delivered by our stations... As we reasked and pointed out, that other users also have problems we got this today: ----------------------------------cut------------------------------------- Von: Peet Bros. <[email protected]> Gesendet: Mittwoch, 14. April 2010 16:54 An: [email protected] Betreff: RE: Ultimeter 2100 delivering wrong values Hi Daniel, Based upon the information you've provided, it appears that people are having difficulty with configuration of radios and interfaces, and also possibly with the serial cables they are using. It is a common mistake, when a person fabricates a modular cable with RJ-11 or RJ-12 plugs, that they will use RJ plugs designed for SOLID wire with their STRANDED wire cable. There are two designs of modular RJ plugs: for solid wire cable (such as old telephone cable), and for stranded wire cable ----------------------------------cut------------------------------------- We ONLY have original Peet cables attached to our Peet Ultimeter 2100 and we used a bought stranded cable, cut it in the middle to solder on the 3,5mm stereo plug... We will try our luck with ferrites now... as the problem seems to be our unabilty to configure our devices... hi We hope that we get the station running correctly. I'm also running a Davis Vantage Pro wireless station in my QRL and what should I say - no problems. Our reason to choose the Peet station was that it fits nicely together with our Argent Data T2-135... We still hope this was the right decision. Maybe some OM of you would like to mail your problems to Peet so that they get a little feedback on their products... 73s de Mark , DL1GMC, and Daniel, DH1GD. Am Sonntag, den 11.04.2010, 10:21 +0000 schrieb vk2boz: > > Hi Tim > > Thanks for your input as it has been helpful. I have it settup very > close to yours and it is working better but not quite as it should. > > Still Tx when it wants to but a lot more constant, set time slot at > 16min but it Tx at 30min roughly. I'll look at making an other cable, > (using a cable from an other unit it also had troubles). > > What changes did you do to the code? > > Thanks > Cris VK2BOZ
