Thanks Scott: I suspect that it is in there but several scans thru, I didn't see it.
The only time I see it go red is when the unit transmits. Is this normal or could I be getting RF into the unit? I was using a mag mount antenna and the only real vehicle ground is via the power input. I might try a choke on the two serial ports and during the summer, will attach a body ground at the antenna mount. Thanks again, Curt --- In [email protected], Scott Miller <sc...@...> wrote: > > It should be in there somewhere... it'll blink red when it gets an > invalid fix from the GPS and yellow when it outputs a waypoint. > > Scott > > captc...@... wrote: > > > > > > What is the significance of the red color of the ACT LED on the OT2? > > > > I see it blinking with data comm from the Nuvi 350 and it goes to red > > when the system is keyed and the TX LED comes on. > > > > Can't find any reference to what this means in the manual. > > > > Thanks > > > > Curt > > > > >
