I have the same setup, when I power down my 135 and turn it back on, it
works in APRS mode, I don't have to reset it. for what it's worth, I
have the APRS Channel as Number 1
On 5/28/2010 9:21 AM, nb7o wrote:
I am away from my 135 for a few days so I will not be able to do any
testing for you. However, I know that I have the data mode saved in
memory for a few frequencies and when I dial them up they come up with
the data mode properly operating.
I also can absolutely tell you that if I shut off my 135 and then
restore power it returns to life in the data mode.
I am off to meet with a building inspector. I will review the owners
manual when I return to see if I can find something that you have missed.
The combination of equipment that you have is outstanding. I am
certain that you will work this through and then look in the mirror
and get a good laugh.
If you will need to work through some things for testing email me
direct. Then we can report ur findings back to the group here.
seven three de kevin/NB7O
--- In [email protected] <mailto:tracker2%40yahoogroups.com>,
"gsanders100" <yahoomail3...@...> wrote:
>
> I picked up a new DR-135T at Dayton, and ordered a T2-135, which
arrived today.
>
> Installation was straightforward, with no major issues. I was able
to successfully configure it with the config program, although I
haven't actually put it on the air yet.
>
> However, one thing seems odd, and I've Googled for an answer and
looked through previous newsgroup posts without any luck.
>
> The FAQ on the Argent site has the following:
>
> "Can the radio be used for both voice and data?"
>
> "Each memory channel can be configured as either a voice channel or
a data channel. When a data channel is selected, the TNC is
automatically started and the speaker is muted."
>
> If I understand the FAQ correctly, it seems to imply that the Data
Mode state can be saved to the channel memory, but mine doesn't want
to work that way. I can put the radio in Data Mode, and then write to
the channel memory. However, when I change to another channel, then go
back to the APRS memory channel, it is no longer in Data Mode. Also,
if the radio is on the memory channel with Data Mode, and I turn off
the radio, when I turn it back on it's no longer in Data Mode.
>
> Is this the way it's supposed to work, or am I missing something
somewhere along the line?
>
> Gary Sanders
> WB0BZR
>
