Hi Lynn, I had to exit KISS to send commands, then re-enter KISS when I was using the PDA. I continue to do the same with APRSIS32 as well. Best regards, Fred
_____ From: [email protected] [mailto:[email protected]] On Behalf Of Lynn W. Deffenbaugh (Mr) Sent: Wednesday, July 28, 2010 14:37 To: [email protected] Subject: Re: [tracker2] OT2m Commands via KISS? I don't know if it's supposed to work, but it doesn't. The first two command methods work, but commands via KISSed APRS message don't. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32 Lynn W. Deffenbaugh (Mr) wrote: > Short question: Can I send an OT2m commands via APRS message directly > into a KISS port? > > Longer description: I have an OT2m connected to a Nuvi 350 on port B > (BMODE GARMIN) and a PC connected on port A (AMODE KISS). I know I can > send commands from the Nuvi (via "--info" for instance) and via APRS > messaging over RF ("cmd info" as an APRS message). > > If I send an APRS message into the OT2m via the KISS port, addressing > the OT2m's callsign with a body of "cmd info", will it send a response > back or would the message have to be transmitted and heard back from a > digipeater? > > This is all assuming that the KISS-originated message actually comes > from an authorized callsign just like the same command via RF. > > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32 > (and hoping that I can send commands to the OT2m from that software) >
