Good to know! I've got it on my to-do list now and I'll get back to you with updated firmware when I've got something ready to test.
Thanks, Scott Paul Meyer wrote: > > > I recently tested an Argent T2-301 radio with integrated TNC with a > Davis Vantage Pro with the serial weatherlink module on my home weather > station and got it to work with Scott's help. > > I have been testing the same at work now with a brand new cabled Davis > Vantage Pro 2 unit and the serial weatherlink module (not the APRS > streaming module). It has mainly been transmitting status packets and > only three weather packets, only one of which was correct. After > scratching head many times today, I finally consulted the Davis website > to discover that the Vantage Pro and the Vantage Pro2 units utilize > slightly different serial protocols. The Pro2 expects only one line feed > / carriage return not both according to Davis and timing changes on the > Vantage Pro2. > > I'm including the link to Davis' comm manual that describes these > differences. Perhaps there needs to be two Davis modes in the Argent code. > > http://www.davisnet.com/support/weather/software_dllsdk.asp > > Choose the Vantage Pro and Pro2 Serial Communications Reference, 2.3.0 > to see the differences. > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/tracker2/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/tracker2/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
