scatman_166 (callsign?) wrote... > I am unable to direct program frequencies from mic on two Alinco > DR-135's with tracker 2 tnc board?? I could until the board was > installed any ideas to why?? The channel up down buttons work but > nothing else on the mic does except ptt.
Search the archives for comments I posted about a year and a half ago, and again inn probably the last six months or so. Pop the lid on the radio and unplug the two pin cable that's over on the left side of the radio with (going by memory) the front of the radio facing you. You will regain some of the functions... e.g. with the radio in digital mode, you will be able to punch a frequency in on the MIC. You will then have to take it out of digital mode to use it for voice. It's an annoying quirk of the DR-135 but it's worth it to have the T2-135 in there. Going by memory, I think it's the same when the stock Alinco TNC is installed. 73 es cul - Keith VE7GDH -- "I may be lost, but I know exactly where I am!"
