ok so i figured out that i can change the tx level without taking out the tracker and radio from my car. down now to about 75 made a much better difference than the day before but not right where it should be so more adjusting in the future. a much bettter aprs day for me today!!
--- In [email protected], "kd8htg" <kd8...@...> wrote: > > ok here goes. so i set the tx level back to about half which didn't seem to > make much of a difference. i know after doing some reading on previous post > that louder isnt' better and it seems that the half way mark at least in my > application is still too loud. my install in my car makes it a bit of a pain > to remove the tracker every time i want to change the tx level. (i will be > changing the install setup in the near future) but in the mean time i see > there is a command > for the nuvi 350 > > --TXLEVEL <1-255> > > so now im trying to figure this out if i sent --txlevel i should get a > message from teh tracker showing what the value is actually set to at that > moment. is this command just that a reply of that level or is it possible to > change the tx level by using this command say > --txlevel <100> > > if i was able to change this level with out removing the tracker at this > moment in time it sure would be handy. > > > > and james yes your right a nice pdf about setting devation sure would have > been handy for a guy like me who was so excited to finally get my tracker i > totally over looked it. i mean come on they were on back order for at least a > month. oh well i learned my lesson RTFM i deserve that one > take care > JD
