I forgot to add the command line I used to get the outputs below. Here it is:
transcode -i "/home/hako/Video/Ozel/mayis2006.avi" -P 2 -y xvid4 -I 3 -C 3 -o "/home/hako/Video/Ozel/mayis2006XviD.avi" Thanks, Hakan Duran > Hi eveybody, > > I've been using transcode via gtranscode for about a year with the same > camera and settings. Recently I had to re-install the OS, including > transcode v1.0.2 on mandriva 2006. The first attempt after this, to encode > my digital video failed as follows: > > 1. Transcode Output: > > transcode v1.0.2 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg > libdvdread: Encrypted DVD support unavailable. > libdvdread: Can't open file VIDEO_TS.IFO. > [transcode] (probe) suggested AV correction -D 0 (0 ms) | AV 0 ms | 0 ms > [transcode] auto-probing source /home/hako/Video/Ozel/mayis2006.avi (ok) > [transcode] V: import format | Digital Video RIFF data, AVI (V=dv|A=avi) > [transcode] V: import frame | 720x480 1.50:1 > [transcode] V: de-interlace | (mode=3) zoom to full frame (slow) > [transcode] V: mirror frame | yes > [transcode] V: bits/pixel | 0.174 > [transcode] V: anti-alias | (mode=3|0.33|0.50) process full frame > (slow) [transcode] V: decoding fps,frc | 29.970,4 > [transcode] V: Y'CbCr | YV12/I420 > [transcode] A: import format | 0x1 PCM [32000,16,2] 1024 > kbps [transcode] A: export format | 0x1 PCM [32000,16,2] > 1024 kbps [transcode] V: encoding fps,frc | 29.970,4 > [transcode] A: bytes per frame | 4272 (4270.933333) > [transcode] A: adjustment | [EMAIL PROTECTED] > [transcode] A: pass-through | yes > [transcode] V: IA32/AMD64 accel | sse2 (sse2 sse mmxext mmx asm C) > tc_memcpy: using sse for memcpy > [transcode] V: video buffer | 50 @ 720x480 > [import_avi.so] v0.4.2 (2002-05-24) (video) * | (audio) * > [import_dv.so] v0.3.1 (2003-10-14) (video) DV | (audio) PCM > [export_raw.so] v0.3.12 (2003-08-04) (video) * | (audio) MPEG/AC3/PCM > [export_xvid4.so] v0.0.5 (2003-12-05) (video) XviD 1.0.x series (aka API > 4.0) > > | (audio) MPEG/AC3/PCM > > [import_avi.so] format=0x1, rate=32000 Hz, bits=16, channels=2, > bitrate=1024 [import_dv.so] tcextract -x dv -i > "/home/hako/Video/Ozel/mayis2006.avi" -d 0 | tcdecode -x dv -y yv12 -d 0 -Q > 5 > [export_xvid4.so] Neither './xvid4.cfg' nor '~/.transcode/xvid4.cfg' > [export_xvid4.so] found. Default settings will be used instead. > tc_memcpy: using sse for memcpy > Segmentation fault > [EMAIL PROTECTED] Ozel]$ sh: line 1: 10098 Can not import data > tcextract -x dv -i "/home/hako/Video/Ozel/mayis2006.avi" -d 0 > 10099 | tcdecode -x dv -y yv12 -d 0 -Q 5 > > 2. tcprobe output: > > [tcprobe] RIFF data, AVI video > [avilib] V: 29.970 fps, codec=dvsd, frames=17917, width=720, height=480 > [avilib] A: 32000 Hz, format=0x01, bits=16, channels=2, bitrate=1024 kbps, > [avilib] 17917 chunks, 76521804 bytes, CBR > [tcprobe] summary for mayis2006.avi, (*) = not default, 0 = not detected > import frame size: -g 720x480 [720x576] (*) > frame rate: -f 29.970 [25.000] frc=4 (*) > audio track: -a 0 [0] -e 32000,16,2 [48000,16,2] -n 0x1 [0x2000] (*) > bitrate=1024 kbps > length: 17917 frames, frame_time=33 msec, duration=0:09:57.831 > > > I tryed to change the codec to RIFF using avifix, but the resulting file > did not produce anything but a green screen after transcoding. Then I > chenge to codec back to dvsd. > > 3. avifix output: > > [EMAIL PROTECTED] Ozel]$ avifix -i mays2006.avi -F RIFF > [avifix] scanning AVI-file mays2006.avi for header information > [avilib] V: 29.970 fps, codec=dvsd, frames=17917, width=720, height=480 > [avilib] A: 32000 Hz, format=0x01, bits=16, channels=2, bitrate=1024 kbps, > [avilib] 17917 chunks, 76521804 bytes, CBR > [avifix] successfully updated AVI file mays2006.avi > [avilib] V: 29.970 fps, codec=RIFF, frames=17917, width=720, height=480 > [avilib] A: 32000 Hz, format=0x01, bits=16, channels=2, bitrate=1024 kbps, > [avilib] 17917 chunks, 76521804 bytes, CBR > Segmentation fault > [EMAIL PROTECTED] Ozel]$ avifix -i mays2006.avi -F dvsd > [avifix] scanning AVI-file mays2006.avi for header information > [avilib] V: 29.970 fps, codec=RIFF, frames=17917, width=720, height=480 > [avilib] A: 32000 Hz, format=0x01, bits=16, channels=2, bitrate=1024 kbps, > [avilib] 17917 chunks, 76521804 bytes, CBR > [avifix] successfully updated AVI file mays2006.avi > [avilib] V: 29.970 fps, codec=dvsd, frames=17917, width=720, height=480 > [avilib] A: 32000 Hz, format=0x01, bits=16, channels=2, bitrate=1024 kbps, > [avilib] 17917 chunks, 76521804 bytes, CBR > Segmentation fault > > I tried to merge two video files before starting to transcode them one by > one, but after the process reached to the end of the first file, it killed > itself with segmentation fault again, without adding any frames from the > second file. > > Any suggestion is welcome. > > Hakan Duran
