Dwight, Check out GR-2914 "Human Factors Requirements for Equipment to Improve Network Reliability" section 4.2.4 "Color Requirements for Alarms".
For product intended for the EU, check out EN60950 section 1.7.8.2 "Colours" and the referenced document IEC-73 "Basic and safety principles for man-machine interface, marking and identification ..." section 4.2.1.1. Marko Radojicic Hardware Design Assurance, Maple Optical Systems [email protected] Phone: 408/545-1263 FAX: 408/434-9209 -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Dwight Hunnicutt Sent: Monday, January 22, 2001 9:51 AM To: '[email protected]' Cc: '[email protected]'; '[email protected]' Subject: NEBS/telco LED alarm color All- Our system test guys are concerned that we don't vary our T1 card indicator LED color to distinguish between minor, major, and critical alarms. I recall a Bellcore spec that says we have to do this. Can anyone help me track down the spec reference for this? thanks Dwight ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
