> From: [email protected]
> Received: from bos1g.delphi.com by world.std.com (5.65c/Spike-2.0)
> Subject: Re: Poland Standards
> [In response to the request from Tom Steele, Penril]
> 
> Tom,
> 
> I'm not sure which country variant is the basis of your 
> Polish modem but, there are a number of additional 
> considerations you should not over look.  As some of the 
> answers have already been provided I will just confirm the 
> parameters that I know to be correct and that I've got 
> product approved to.
> 
>      1. Loop Current : 17 - 55 mAdc (<600 ohm)
>      
>      2. Ring Cadence: 1s ON - 1s OFF
>      
>      3. Dial Tone 
>         Valid DT Frequencies : 325 to 660 Hz
>         Min. Dial Level : -50 dBm
>         Min. Valid Tone : 550 ms
>         Max. DT Drop Out:   1 ms
>       
>      4. Dialing Parameters
>         Mode : Pulse or Pulse & DTMF
>         
>         Loop Dis. (Pulse) :-
>         Frequency : 10 Hz +/- 5%
>         Break/Make: 2:1 (66:33)
>         Current   : <0.4 mA (60V/1000ohm Supply)
>         Voltage   : <10 V (I=17mA)
>         Interdigit
>         Pause     : 800 to 1000 ms
>         
>         DTMF :-
>         Frequency : As per CCITT Q.23
>         Tolerance : +/- 1.5 %
>         Power(Low): -8 dBm +/- 1.5 dB
>         (Hign Grp): -6 dBm +/- 1.5 dB
>         Cadence   : >70ms ON & >70ms OFF
>        
> Compliance with CCITT K.21 is also a must, where the 
> overvoltage limits are 2kV using the 10/700 (micro sec.) 
> pulse shape.  Another overload test is also applied which is 
> 60Vdc superimposed by 100V/50Hz.
> 
> Should you require professional assistance in meeting the 
> type approval requirements throughout Eastern Europe and 
> the  CIS (Former Soviet Union), then please feel free to 
> contact me directly.
> 
> Best regards,
> 
> Edward Fitzgerald
> 
> GSM      : +44-4685-33-100
> Internet : [email protected]
> X.400    : G=Edward; S=Fitzgerald; A=400net; P=itu; C=ch
> ___________________________________________________________ 
> |      * *        |  EUROPEAN TECHNOLOGY SERVICES          | 
> |    *  E  *      |         46, Ramley Road                | 
> |   *   T   *     |      Lymington, Hampshire              | 
> |   *   S   *     |        SO41 8GT - England              | 
> |    *     *      |   Tel : +44 1590 67 93 22              | 
> |      * *        |   Fax : +44 1590 67 93 23              | 
> |__________________________________________________________| 
> | Specialists in the field of International Communications | 
> |             Regulations and Type Approvals               | 
> |__________________________________________________________|
> 

Reply via email to