On 11/19, Dan Roman wrote:
> I'm looking for an off the shelf 48Vdc 1A out and 90-250Vac in power > supply (wall mount or desktop) which has UL/CSA/TUV/CE or the equivalent > approvals. I'm hoping to find something that can be used pretty much > world-wide. I did not think it should be so hard to find something like > this but apparently there are not a lot of them out there. > > Anyone using something they can recommend or know where one might look? > I've found plenty of vendors willing to design one and charge me for the > NRE and approvals but we're not planning on buying 10K a year! > > Thanks in advance for the help, since this is probably not of too much > interest to the whole group, please respond direct. __________________________________________________ Dan, You have just described the PUB 55-18 made by International Power Sources in Ashland MA. Phone 508-881-7434, FAX 800-226-2100. Ask for Denise Mancuso or Susan Cervenak. Tell them I sent you. (Please note that I do not get a commission. I am only looking for one at-a-boy.) This supply is 48 vdc out @ 1.2 A. Input is 85-264 vac, 47-440 Hz, via an IEC 320 receptacle so that you can provide the appropriate cord and plug for any country worldwide. The output of the standard supply is provided via a 4' cord terminated in a 5-pin male circular DIN connector. However, I have negotiated with International Power for a different output connector. The supply is in a "desk-mount" package 2.25" x 3.74" x 6.97". It has all the approvals you requested. Price in 100's is a bit over $1.00/watt. I hope that helps. Pete ---------------------------------------------------------------------------- Peter Van Raalte | Email: [email protected] Compliance Engineer | V-Band Corporation | Phone: 914-789-5117 565 Taxter Road | Elmsford NY 10523 | FAX: 914-347-3432 ---------------------------------------------------------------------------
