Hi folks, We are in the process of producing an installation manual for our small PEBX. More specifically we are attempting to produce a 'basic rate wiring practice' document. While I.430 is a many splendid thing, it is unsuitable as an installation guide. What we need is a document which simplifies matters such as:
1 Practical cabling and lengths, the number of terminals for different grades of cable, and for the 4 different connection schemes (ie. point-to-point, extended passive bus, short passive bus, short Y bus), etc. 2 Exact nature of cable connections, ie. length (if any) of spurs to wall sockets, length of cable to TEs, type of sockets available with/without terminating resistors, etc. 3 Provision of transient protection devices on exposed routes, etc. 4 Suitable means of controlling informal 'patching' to existing S bus networks, especially where ISDN cabling shares regular telephone cabling ducting, etc. I'm sure that there is a wealth of practical information out there that we have not begun to think about yet. Possibly some TREGGERS may be able to advise of personal problems, existing specs, etc., or who could point me at someone who can be of assistance. PS. I appologise for some mail that may have 'bounced' off our gateway recently. We had an extensive fire that destroyed our computer installation. As a result it has taken a while and some bump starts to get going. All is now well again. Thanks, Colin Botha Chief Development Engineer Plessey SA Ltd +21 7102252 [email protected]
