You may want to check with Dr. Steven Kremer at TUV, he can be reached at Phone (416) 733-3677. Matthias R. Heinze TUV Rheinland -----Original Message----- From: Flinders, Randall <[email protected]> To: emc-pstc <[email protected]>; Ray_Russell <[email protected]> List-Post: [email protected] Date: Thursday, November 06, 1997 6:16 PM Subject: RE: Sound Pressure Measurements
> >Ray, > >You might check with John Downs of dB Sound Labs in San Juan Capistrano, >California. He may be able to point you in the right direction. The >number I have is (714) 248-9809. > >Regards, > > >Randy Flinders >EMC Test Engineer >Emulex Network Systems Corporation > >Phone: (714) 513-8012 >Fax: (714) 513-8265 >E-Mail: [email protected] >WebSite: www.emulex.com > >* opinions expressed herein are personal, > and in no way reflect the position of Emulex Corporation. > > > ---------- >From: Ray_Russell[SMTP:[email protected]] >Sent: Wednesday, November 05, 1997 10:11 AM >To: emc-pstc >Subject: Sound Pressure Measurements > > ---------------------------------------------------- > Greetings, > > > We have products that fall under EN 61010, and some that fall under > the Machinery Directive that may need sound measurements. Since this > > is a new area for me, once again, I come to you for advice. > > > I see that ISO 3746 and ISO 9614-1 are called out. Are these the > correct standards to use? Are there others that I should obtain? > > > Does anyone have any recommendations on test equipment, vendors or > even labs in the Midwest that might perform this testing? > > > Thank you in advance for your help, > > > Ray Russell > > > Leco Corporation > 3000 Lakeview Ave. > St. Joseph, MI 49085-2396 > > > Ph (616) 983-0308 > Fx (616) 982-8964 > > > email: [email protected] > > >
