Moshe: We treat the 48V input as a secondary voltage with primary voltage rules. Therefore, you will have to hold to the _reinforced_ distances for creepage and clearance.
Regards, John R. Kretsch, P.E. Compliance Engineering Supervisor ADC Broadband Communications [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, October 21, 1998 03:44 To: [email protected]; [email protected] Subject: isolation of battery (72V max) input Hello everyone, What are creepage/clearance requirements between battery (60V nominal which could go to 72V) conductors and SELV conductors? The equipment resides in "CO like" environment. thanks in advance, Moshe -------------------------------------------- Name: moshe valdman E-mail: [email protected] Phone: 972-52-941200 Telefax: 972-3-5496369 List-Post: [email protected] Date: 21/10/98 Time: 0:44:10 You are most welcome to visit my homepage at: http://www.geocities.com/CapeCanaveral/5233/ -------------------------------------------- --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
