Thank you very much for your information. Richard
>From [email protected] Wed Nov 25 10:29:13 1998 >Received: by europe.std.com (8.7.6/BZS-8-1.0) > id NAA08019; Wed, 25 Nov 1998 13:16:12 -0500 (EST) >Received: from world.std.com by europe.std.com (8.7.6/BZS-8-1.0) > id NAA08005; Wed, 25 Nov 1998 13:16:09 -0500 (EST) >Received: from smtp1.xs4all.nl by world.std.com (TheWorld/Spike-2.0) > id AA05791; Wed, 25 Nov 1998 13:16:08 -0500 >Received: from toshiba (dc2-modem1957.dial.xs4all.nl [194.109.135.165]) > by smtp1.xs4all.nl (8.8.8/8.8.8) with SMTP id TAA00476 > for <[email protected]>; Wed, 25 Nov 1998 19:16:05 +0100 (CET) >Message-Id: <[email protected]> >X-Sender: [email protected] >X-Mailer: QUALCOMM Windows Eudora Pro Version 4.1 >Date: Wed, 25 Nov 1998 19:13:32 +0100 >To: [email protected] >From: Pieter Robben <[email protected]> >Subject: Re: Wireless Local Loop Information >In-Reply-To: <[email protected]> >Mime-Version: 1.0 >Content-Type: text/plain; charset="us-ascii" >Sender: [email protected] >Precedence: list >Reply-To: [email protected] > >Dear Richard, > >I must inform you that the use of the fundamental frequency of 1.9 GHz is >probably not allowed in Europe. The frequency range of 1.88-1.9 GHz is >assigned to DECT (Digital European Cordless Telecommunications) equipment. >In the Netherlands the frequency range from 1.9-2.1 GHz is reserved for >fixed links (the primary user is the Dutch PTT, also some DECT equipment is >allowed here). This might also be the case in other European countries. > >It is advisable to contact each country in the EC concerning the use of a >specific fundamental frequency if you want to utilize a radio link (since >you also have to apply for approval in each European country where you want >to sell a wireless device). Requirements regarding radiated power, occupied >bandwidth etc., may differ in each European country. The choice of standard >(for radio and EMC testing) depends on the fundamental frequency, output >power, for which purpose the radio link is being used etc. You can also >contact a (radio) test lab in one of the countries of the EC to advise you >in this matter. > >Best regards, >Pieter Robben >------------------------------------------------------- >NMi Certin B.V. - Location Niekerk / The Netherlands >NB and CB for EMC, TTE, Radio and Electrical Safety >Tel: +31-594-505005 / 1-860-873-1454 (NMi USA Office) >Fax: +31-594-504804 / 1-860-873-1947 (NMi USA Office) >Email: [email protected] / [email protected] (NMi USA Office) >------------------------------------------------------- > >At 24/11/98 12:33 PM, you wrote: >>Hi Everyone, >> >>Our company manufacture the Wireless Local Loop Products which include >>the Base station & Remote Access Unit. The Base station is connected >>through E1 line to the switch @ the Central office, and between the Base >>Station & the Remote Access Unite is wireless. The fundamental >>frequency is 1.9 Ghz. >> >>I would like to find out what is the standards requirement to have CE >>Mark. Which lab around the Silicon Valley can perform these test >>requirements? >> >>Thanks in advance! >> >>Richard Lee >> >>______________________________________________________ >>Get Your Private, Free Email at http://www.hotmail.com > > ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com
