I have a remark concerning item 2 which states the standards EN 55022 en EN 50082-1. Please note that, although these standards are very popular to use, they do not apply to wireless radio devices in most cases (EN 55022 is mostly being used as a basic standard in applicable ETSI standards). Actually, radio devices are excluded from the scope of the generic standards.
Normally one would use an appropriate (harmonized) ETSI EMC standard for proving compliance with the EMC directive when testing wireless radio devices. The link : http://europa.eu.int/comm/dg03/directs/dg3b/newapproa/eurstd/harmstds/reflis t.html will provide information about the current list of harmonized standards relating to various directives, including the EMC directive. Also I would like to point out that the RTTE directive (item 3) has not yet been published in the OJ so it is not possible to use it at this moment. The directive 98/13/EC seems to be the correct one in this case. Regards, Pieter Robben - NMi Certin B.V. At 98/12/03 04:47 PM, you wrote: >From: [email protected] >Subject: Re: EU Wireless Question > >Dear Colleague, >The product you just describe is probable a voice & data Telecom wireless >category: >as such the following EU directive has to be considered: >1)LVD (safety) 73/23/EEC (compliance with EN60950) >2)EMC 89/336/EEC (compliance with EN55022 classB & EN50082-1) >3)RTTE 98/C227/EEC (this directive call for the relevant CTRs which are >already published consult for this the ETSI >website I am not sure if your equipment falls in this category . You have >to consult a notified body for this directive the best way contact the >following site :www.adlnb.com and ask there for assistance. One more site >where you can get help is www.rcic.com >Hope that this inf. will put you on the track. >Regards Teodor Weisz >Corporate Compliance Eng. >ECI Telecom. Ltd >
