Welcome to my world.  Bluetooth is very handy, but about as easy to figure
out as the cockpit of a 777.  

 

The solution below is one that I've had to do at least twice, and definitely
each time I install the driver for the Bluetooth adapter (in my case, IBM
ThinkPad Bluetooth Adapter III).  I have also had to un-pair and re-pair.
I've had to reset the Treo and restart the computer.  All have fixed the
problem; many times.  I've also had a chronic problem with Hotsync
"forgetting" the right COM port, reverting to COM1 or LPT1 (figure that one
out).  I called Palm about that, since, really, Hotsync should not forget
which COM port I told it.  Palm said something like "duh?"  I've had the
Bluetooth software forget that I'd defined a Bluetooth serial port at all.
This has happened several times. 

 

Bluetooth was obviously designed by a committee.  Very handy; very useful;
very touchy and not at all robust.

 

Something better hasn't come along, yet.

 

Cheers,
Don

 

  _____  

From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of
10.25.2014
Sent: Friday, June 17, 2005 11:29 PM
To: [email protected]
Subject: RE: [Treo] Treo 650 using Bluetooth to HotSync

 

If you using WinXP with SP2 they might be a device conflict between the the
XP SP2 Bluetooth software and the Dongle software, if that's the case then
go to; Control Panel > System > (or My Computer > Properties) > Hardware tab
> Device Manager > Select Bluetooth Devices; under your Dongle software
right click and select Update drive, then point the installation to the
location where you stored your Bluetooth Dongle software (or a CD where the
system files exist). 

-----Original Message-----
From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Larry
Belikoff
Sent: Saturday, June 18, 2005 5:48 AM
To: [email protected]
Subject: [Treo] Treo 650 using Bluetooth to HotSync

I bought a bluetooth USB adapter for my laptop thinking it would be handy to
HotSync wirelessly.  I had successfully at one point got it working, but
now, no matter what I do, I can't seem to get HotSync to activate.  I have
defined COM5 to the serial bluetooth connection on the laptop, and set the
local (checked) port to Com5 in HotSync.  Bluetooth on the laptop
acknowledges the Treo 650 connection, but then it just sits there waiting
for HotSync to activate on the laptop (which it never does). The bluetooth
adapter is from IOGEAR Model# GBU311.  I'm not even sure whose problem it
is.  Is it the bluetooth serial software not sending out a notification on
the Com5 port, or is it Hotsync not recognizing that something is connected
to Com5?  Anyone have any advice?

Thanks,
Larry






[Non-text portions of this message have been removed]



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/treo/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to