Not sure if this is still a problem, but an alternative to creating a new user is to do a hard reset, and then copy the contents of the c:\palm\username\backup directory (or whatever it is called on your computer). If you don't clear out this directory, then all of these files will be reinstalled to your Treo on your first hot sync after your hard reset (putting you back into the same out of memory situation). After you clear out this Backup directory, install the Sprint update, and when done, reinstall all these files back to your Treo. The quickest way to do that is double-click on one of the .prc files you want to install (as you normally would to install a file), and then copy all the files that used to be in your Backup directory to your c:\palm\username\install directory. This will trick Palm to reinstall everything for you w/o having to double-click on everything. Anyway, just thought I'd throw that out there if you're still having problems. Bob O'Malley
On 6/18/05, Don Ferguson <[EMAIL PROTECTED]> wrote: > > Hi again. Not sure if we're in sync here (so to speak) but it's not so > much > that the Treo has to be empty after the hard reset (which it certainly > will > be) but that you're not syncing down the data from the existing user at > the > same time you are syncing down the Updater. That's why I mentioned > creating > a new Palm user. Did you do that? You didn't say. > > > > The contents of the SD card would be irrelevant to this process. > > > Cheers, > > Don > > > > _____ > > From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Ian > Lind > Sent: Saturday, June 18, 2005 3:07 PM > To: [email protected] > Subject: [Treo] Re: Sprint update troubles > > > > Yup. I checked after the hard reset to make sure that the data were gone. > > Thinking aobut it this morning, it occured to me that I had a card in the > slot and perhaps > that somehow screwed things up. > > On Monday, I'll take the card out and try the sequence again. > > As before, any suggestions will be appreciated. > > > > > --- In [email protected], "Don Ferguson" <[EMAIL PROTECTED]> wrote: > > Did you follow the instructions that said to create a new user? If you > just > > hard reset and then sync, it'll just put back everything that was there > > before. You have to do a hard reset and then create a new Palm user and > > then sync the updater with that new, empty user. Then, when you're done, > > switch back to the original user and sync everything back to the Treo. > > > > HTH, > > Don > > > > ________________________________________ > > From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of > Ian > > Lind > > Sent: Saturday, June 18, 2005 11:41 AM > > To: [email protected] > > Subject: [Treo] Sprint update troubles > > > > I tried yesterday to apply the new firmware update to my Sprint Treo > 650, > > beginning with a > > hard reset to free up memory. > > > > Despite the hard reset, when the updater ran it immediately gave me the > > error message > > about insufficient memory. The remedy for this, at least according to > the > > PalmOne web site, > > is to do a hard reset. > > > > So I'm stuck. > > > > I had to restore my Treo from the backup file and call for help. > > > > HELP! > > > > Any suggestions? > > > > > > > > > _____ > > Yahoo! Groups Links > > * To visit your group on the web, go to: > http://groups.yahoo.com/group/treo/ > > * To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > > * Your use of Yahoo! Groups is subject to the Yahoo! > <http://docs.yahoo.com/info/terms/> Terms of Service. > > > > [Non-text portions of this message have been removed] > > > > > Yahoo! Groups Links > > > > > > > [Non-text portions of this message have been removed] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/treo/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
