FYI, I had a somewhat different cradle but the same problem. The back
heal of the Treo rested snugly in the cradle. That left no clearance
with the case on. 

I solved the problem by modifying the cradle. Opening it revealed a
simple design. The circuit board holding the connector was held on two
posts. The post ends had an angle to them. The connector was
originally parallel to the back rest of the cradle. After a few
minutes with my dremel tool the posts now have more plumb ends. Now
the connectors sits a few millimeters forward. It is also several
degrees more vertical than the back rest. The connector also pokes up
a bit out of the base now as well. 

As a result, I no longer have to remove the case from my Treo to dock
it in the cradle. I'm sure my description is less than perfectly clear
so here are some more datails for those interested.

Case:
- Palm Leather Latch Case for Treo600/650 (ID #115 [*])

Cradle:
- Smartphone Experts Cradle for Treo 650 (ID# 353 [*])

[*] both cost $19.96 from TreoCentral Store

Pix:
http://tinyurl.com/7bh5r
<http://photos.groups.yahoo.com/group/treo/lst?&.dir=/Cas
e+%26+Cradle+for+Treo+650&.src=gr&.view=t&.url=h
ttp%3a//us.f1.yahoofs.com/groups/g_4143290/Case%2b%2526%2bCr
adle%2bfor%2bTreo%2b650/Leather%2bcase%2bon%2bTreo%2b650.jpg
%3fbcUqRtyBt.jVvN0x&.cx=150&.cy=150&.type=u>

Enjoy, and Happy New Year to everyone and their PDA!
-Bob


--- "Don Ferguson" <[EMAIL PROTECTED]> wrote:
>
> Yep, virtually none.  It's designed so that the Treo sits smoothly
against
> the back of the cradle at the proper angle.
> 
> Cheers,
> Don
> ________________________________________
> From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of
> Jeffrey Kaplan
> Sent: Wednesday, December 28, 2005 5:40 PM
> To: [email protected]
> Subject: Re: [Treo] Anti-slip case AND palmOne cradle
> 
> On Wed, 28 Dec 2005 18:33:58 -0500 Douglas J. Boehme wrote:
> 
> > I have the Speck case and holster (clear, from the Treonauts
store) and
> I'm
> > very impressed with the quality having tried lots of other cases.
> > Unfortunately, I only have the Seido case to try it in.  What's the
> > clearance like between the Treo and the Palm cradle without any case
> > material on the Treo?
> 
> Very, very tight.
> 
> -- 
> Jeffrey Kaplan                                         www.gordol.org
> The from userid is killfiled             Send personal mail to gordol
> 
> DISCLAIMER: The mass of this product contains the energy equivalent of
> 85 million tons of TNT per net ounce of weight.
>






------------------------ Yahoo! Groups Sponsor --------------------~--> 
1.2 million kids a year are victims of human trafficking. Stop slavery.
http://us.click.yahoo.com/.QUssC/izNLAA/TtwFAA/87folB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/treo/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to