This months problem of the month was about an electric fence monitor. http://everycircuit.com/circuit/5798493590650880/electric-fence-voltage-moni tor
During the meeting, I was pointed to Panasonic high surge resistors at Digikey. After a bit of searching, this is what I think would work. https://www.digikey.com/product-detail/en/HVR2500001005JA100/BC4429CT-ND/735 1859/?itemSeq=321321346 10000V R1 10Mohm 7514.9V R2 10Mohm 5029.8V R3 10Mohm 2544.7V R4 10Mohm 59.6V R5 220Kohm 4.97V ß Arduino monitors here R6 20Kohm GND Any comments about these resistors? I was thinking of soldering them in series and then potting them with this: https://smile.amazon.com/Clear-Electronic-Grade-Silicone-Squeeze/dp/B0063U2R PW/ref=sr_1_19?crid=2RXV4MC2DX1Y2 <https://smile.amazon.com/Clear-Electronic-Grade-Silicone-Squeeze/dp/B0063U2 RPW/ref=sr_1_19?crid=2RXV4MC2DX1Y2&dchild=1&keywords=potting%2Bcompound%2Bfo r%2Belectronics&qid=1584805104&sprefix=potting%2Bcom%2Caps%2C165&sr=8-19&th= 1> &dchild=1&keywords=potting%2Bcompound%2Bfor%2Belectronics&qid=1584805104&spr efix=potting%2Bcom%2Caps%2C165&sr=8-19&th=1 ---> Paul
_______________________________________________ Triangle, NC Embedded Computing mailing list To post message: [email protected] List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org TriEmbed web site: http://TriEmbed.org To unsubscribe, click link and send a blank message: mailto:[email protected]?subject=unsubscribe
