I've done this before on the command line. Check this out and see if it helps. https://www.digikey.com/en/maker/blogs/raspberry-pi-wi-fi-bluetooth-setup-how-to-configure-your-pi-4-model-b-3-model-b https://www.cnet.com/tech/computing/how-to-setup-bluetooth-on-a-raspberry-pi-3/
~Carl On Wed, Dec 7, 2022 at 2:06 PM Brian Chamberlain via TriEmbed < triembed@triembed.org> wrote: > Hi Warren, > Is it this device? > https://www.mccdaq.com/wireless-data-acquisition/BTH-1208LS-Series > > I don't have the Bullseye build on my Pi so I can't test this but IIRC > Debian (and probably Bullseye) uses Bluez to manage bluetooth connections. > Have you tried the CLI? This article looks like it might be helpful > https://wiki.debian.org/BluetoothUser See the "Paring with CLI" section. > I also found this article with similar instructions. But I think you can > safely ignore the part about installing the 'pulseaudio' package. > https://forums.debian.net/viewtopic.php?t=137635 > > -Brian > > > On Wed, Dec 7, 2022 at 12:33 PM Warren J Jasper via TriEmbed < > triembed@triembed.org> wrote: > >> Hi, >> >> On a recent upgrade on my Raspberry Pi from Buster to Bullseye, I can no >> longer pair with an embedded bluetooth device >> BTH-1208LS. The Pi sees the device in pairing mode, but when I try pair >> with the GUI, it says pairing failed. >> It might have something to do with legacy pairing, as the device is >> rather old. >> >> If someone has insight into how Bluetooth works on the RPi and I can >> either force pairing or find a way to >> enter the code to initiate pairing that would be quite helpful. >> >> Thanks, >> >> Warren >> >> -- >> =============================== >> Warren J. Jasper, PhD, PE >> Professor >> Academy of Outstanding Faculty in Extension and Engagement >> North Carolina State University >> Raleigh, NC 27695 >> Tel (919) 515-6565 >> Fax (919) 515-6532 >> >> >> _______________________________________________ >> Triangle, NC Embedded Interest Group mailing list >> >> To post message: TriEmbed@triembed.org >> List info: >> http://mail.triembed.org/mailman/listinfo/triembed_triembed.org >> TriEmbed web site: https://TriEmbed.org >> To unsubscribe, click link and send a blank message: mailto: >> unsubscribe-triem...@bitser.net?subject=unsubscribe >> Searchable email archive available at >> https://www.mail-archive.com/triembed@triembed.org/ >> >> _______________________________________________ > Triangle, NC Embedded Interest Group mailing list > > To post message: TriEmbed@triembed.org > List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org > TriEmbed web site: https://TriEmbed.org > To unsubscribe, click link and send a blank message: mailto: > unsubscribe-triem...@bitser.net?subject=unsubscribe > Searchable email archive available at > https://www.mail-archive.com/triembed@triembed.org/ > > -- -------------------------------------------------------------- Carl J. Nobile (Software Engineer/API Design) carl.nob...@gmail.com --------------------------------------------------------------
_______________________________________________ Triangle, NC Embedded Interest Group mailing list To post message: TriEmbed@triembed.org List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org TriEmbed web site: https://TriEmbed.org To unsubscribe, click link and send a blank message: mailto:unsubscribe-triem...@bitser.net?subject=unsubscribe Searchable email archive available at https://www.mail-archive.com/triembed@triembed.org/
