I've played with this with standard transparency film and a little 40w Chinese laser- takes a bit of tuning to get it all correct but works. Stencils are really cheap when you order a board if you remember.
Regards, John M. Wettroth E: [email protected] M: (919) 349-9875 H: (984) 329-5420 -----Original Message----- From: TriEmbed <[email protected]> On Behalf Of Pete soper via TriEmbed Sent: Saturday, June 3, 2023 1:51 PM To: Triangle Embedded Interest Group <[email protected]> Subject: [TriEmbed] a full custom biz card that runs Linux He made his solder stencil with a laser cutter and the BOM runs around $3. https://www.thirtythreeforty.net/posts/2019/12/my-business-card-runs-linux/ _______________________________________________ Triangle, NC Embedded Interest Group mailing list To post message: [email protected] List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org TriEmbed web site: https://TriEmbed.org To unsubscribe, click link and send a blank message: mailto:[email protected]?subject=unsubscribe Searchable email archive available at https://www.mail-archive.com/[email protected]/ _______________________________________________ Triangle, NC Embedded Interest Group mailing list To post message: [email protected] List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org TriEmbed web site: https://TriEmbed.org To unsubscribe, click link and send a blank message: mailto:[email protected]?subject=unsubscribe Searchable email archive available at https://www.mail-archive.com/[email protected]/
