Hi Russ, Thanks for this review. Sorry for the delay in responding but I think it went astray for some reason and we just saw it recently.
From: Russ White <[email protected]> Date: Mon, Dec 28, 2015 at 9:16 PM Subject: [RTG-DIR] RtgDir review: draft-ietf-trill-irb-09.txt To: [email protected], [email protected], [email protected] Cc: [email protected], Jon Hudson <[email protected]> > Y'all -- > > I have been selected as the Routing Directorate reviewer for this > draft. The Routing Directorate seeks to review all routing or > routing-related drafts as they pass through IETF last call and IESG > review, and sometimes on special request. The purpose of the review > is to provide assistance to the Routing ADs. For more information > about the Routing Directorate, please see > http://trac.tools.ietf.org/area/rtg/trac/wiki/RtgDir > > Although these comments are primarily for the use of the Routing > ADs, it would be helpful if you could consider them along with any > other IETF Last Call comments that you receive, and strive to > resolve them through discussion or by updating the draft. > > Document: draft-ietf-trill-irb-09.txt > Reviewer: Russ White > Review Date: 28 December 2015 > Intended Status: Standard Track > > I have some minor concerns about this document that I think should > be resolved before publication. > > First, in 5.2: > > When a routing instance is created on an edge RBridge, the tenant > ID, tenant Label (VLAN or FGL), tenant gateway MAC, and their > correspondence should be set and globally advertised (see Section > 7.1). > > When an ingress RBridge performs inter-subnet traffic TRILL > encapsulation, the ingress RBridge uses the Label advertised by the > egress RBridge as the inner VLAN or FGL and uses the tenant gateway > MAC advertised by the egress RBridge as the Inner.MacDA. The egress > Bridge relies on this tenant Data Label to find the local VRF > instance for the IP forwarding process when receiving inter-subnet > traffic from the TRILL campus. (The role of tenant Label is akin to > an MPLS VPN Label in an MPLS IP/MPLS VPN network.) Tenant Data > Labels are independently allocated on each edge RBridge for each > routing domain. > > There seems to be some confusion between the concepts of a tenant > label and a tenant data label. Is the tenant label globally set and > advertised, or is it locally set on a per edge RBridge basis? Is it > the set of tenant id + tenant lable that is meant to be unique, or > -- ?? This seems like it could use some clarification. I believe the distinction is between Tenant ID and Tenant Label. I think all instances of Label, at least in this section, could say "Data Label" and that "Label" is just used as a shorter form. In TRILL, "Data Label" is used to mean "VLAN or Fine Grained Label (FGL)". The Tenant ID is unique across the TRILL campus but the Tenant Data Label for that Tenant ID can be different at different edge RBridges. > Second, it seems that the way this should work would be with host > routes at layer 3. I'm not certain how a subnet route would really > work given the ability of the operator to split a subnet across > multiple flooding domains under multiple ToR devices. Is this > correct? There doesn't seem to be any mention in the document. Well, if you have to go to different egress RBridges for different individual IP addresses of a Tenant, then you need host routes. But how different is that from a subnet of size 1? > The formaqtting of the document looks fine. There do not appear to > be any downrefs. The security considerations section appears to be > useful, and to cover the issues I could think of when reading > through the doc. Thanks. I'm sure if I've said anything wrong above, the authors will correct me. Donald =============================== Donald E. Eastlake 3rd +1-508-333-2270 (cell) 155 Beaver Street, Milford, MA 01757 USA [email protected] > :-) > > Russ From: Russ White <[email protected]> Date: Mon, Dec 28, 2015 at 9:16 PM Subject: [RTG-DIR] RtgDir review: draft-ietf-trill-irb-09.txt To: [email protected], [email protected], [email protected] Cc: [email protected], Jon Hudson <[email protected]> > > > Y'all -- > > I have been selected as the Routing Directorate reviewer for this draft. The > Routing Directorate seeks to review all routing or routing-related drafts as > they pass through IETF last call and IESG review, and sometimes on special > request. The purpose of the review is to provide assistance to the Routing > ADs. For more information about the Routing Directorate, please see > http://trac.tools.ietf.org/area/rtg/trac/wiki/RtgDir > > Although these comments are primarily for the use of the Routing ADs, it > would be helpful if you could consider them along with any other IETF Last > Call comments that you receive, and strive to resolve them through discussion > or by updating the draft. > > Document: draft-ietf-trill-irb-09.txt > Reviewer: Russ White > Review Date: 28 December 2015 > Intended Status: Standard Track > > I have some minor concerns about this document that I think should be > resolved before publication. > > First, in 5.2: > > When a routing instance is created on an edge RBridge, the tenant ID, tenant > Label (VLAN or FGL), tenant gateway MAC, and their correspondence should be > set and globally advertised (see Section 7.1). > > When an ingress RBridge performs inter-subnet traffic TRILL encapsulation, > the ingress RBridge uses the Label advertised by the egress RBridge as the > inner VLAN or FGL and uses the tenant gateway MAC advertised by the egress > RBridge as the Inner.MacDA. The egress Bridge relies on this tenant Data > Label to find the local VRF instance for the IP forwarding process when > receiving inter-subnet traffic from the TRILL campus. (The role of tenant > Label is akin to an MPLS VPN Label in an MPLS IP/MPLS VPN network.) Tenant > Data Labels are independently allocated on each edge RBridge for each routing > domain. > > There seems to be some confusion between the concepts of a tenant label and a > tenant data label. Is the tenant label globally set and advertised, or is it > locally set on a per edge RBridge basis? Is it the set of tenant id + tenant > lable that is meant to be unique, or -- ?? This seems like it could use some > clarification. > > Second, it seems that the way this should work would be with host routes at > layer 3. I'm not certain how a subnet route would really work given the > ability of the operator to split a subnet across multiple flooding domains > under multiple ToR devices. Is this correct? There doesn't seem to be any > mention in the document. > > The formatting of the document looks fine. There do not appear to be any > downrefs. The security considerations section appears to be useful, and to > cover the issues I could think of when reading through the doc. > > :-) > > Russ > > _______________________________________________ trill mailing list [email protected] https://www.ietf.org/mailman/listinfo/trill
