Hmmmm....had not realized that I needed to load the spca5xx as a module. Once I did modprobe spca5xx (and validated that it loaded through lsmod), gqcam worked.
Thanks! -- William Sutton On Wed, 18 Jan 2006, Timothy A. Chagnon wrote: > I'll check what my syslog output looks like when I get home, but I'm > pretty sure it's more than those two lines. > > So, if you don't have the camera plugged in, and don't have the > spca5xx or videodev modules inserted, then plug the camera in, do both > modules get inserted / show up in lsmod? > > Oh, I also remembered... maybe try the commands v4l-info, v4l-conf, > v4lctl. See if those can access the camera. > > On 1/18/06, William Sutton <[EMAIL PROTECTED]> wrote: > > latest (not stable) version of spca5xx; I would guess if yours works, mine > > should work. The problem seems to be a disconnect between the video > > device and the hardware!? Is that the spca5xx layer, or (my guess) the > > videodev layer? > > > -- > TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug > TriLUG Organizational FAQ : http://trilug.org/faq/ > TriLUG Member Services FAQ : http://members.trilug.org/services_faq/ > > -- TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug TriLUG Organizational FAQ : http://trilug.org/faq/ TriLUG Member Services FAQ : http://members.trilug.org/services_faq/
