On 4/30/06, T. Bryan <[EMAIL PROTECTED]> wrote:
A while back I finally upgraded my Debian machine's kernel from 2.4.x to
2.6.15. I don't know much about LVM, but I had set up LVM with something
like this (where /dev/md0 is a RAID1 device on two entire disk partitions).
pvcreate /dev/md0
vgcreate localvg /dev/md0
lvcreate -L20G -nlv_local1 localvg
mke2fs -j /dev/localvg/lv_local1
mount /dev/localvg/lv_local1 /opt
That seemed to work. Update /etc/fstab to mount the logical volume at /opt,
and it ran like a charm. Post reboot, I could access /opt, and (from what I
can remember), /opt appeared to be a logical volume on top of the RAID1
device.
After the kernel upgrade...
# grep opt /etc/fstab
/dev/localvg/lv_local1 /opt ext3 defaults 0 0
Based on my ubuntu setup, try changing that last line to:
/dev/mapper/localvg-local1 /opt ext3 defaults 0 0
--
Rick DeNatale
Visit the Project Mercury Wiki Site
http://www.mercuryspacecraft.com/
--
TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug
TriLUG Organizational FAQ : http://trilug.org/faq/
TriLUG Member Services FAQ : http://members.trilug.org/services_faq/
