Hi Gang,
Just wondering if anyone else has seen a depressingly high
failure-rate for blank dual-layer DVDs. For me, it seems like a good
40-50% of my blank discs crap out during burn at the layer switch;
growisofs says ":-( write failed: Input/output error" at 49.6%
completion. (It's so close to 50% is why I suspect something going
wrong at the layer switch).
Or is it something I'm doing wrong? Most often I'm burning single-layer
media, either CD or DVD-RW. Is there something I need to do to tell the
hardware to expect to have to do a layer switch? I sort of expected the
drive to figure that out on its own.
My growisofs command is thus:
growisofs -Z /dev/dvdrw=dual-layer.ext2
where dual-layer.ext2 is a ext2-formatted 8.0GB loopback file I use as a
staging area for creating backups and such. When it doesn't crap out at
49.6%, it works fine, so it makes it difficult to figure out if I'm
doing something wrong.
Cheers,
~Brian
--
----------------
Brian A. Henning
strutmasters.com
336.597.2397x238
----------------
--
TriLUG mailing list : http://www.trilug.org/mailman/listinfo/trilug
TriLUG Organizational FAQ : http://trilug.org/faq/
TriLUG Member Services FAQ : http://members.trilug.org/services_faq/
