I have been using the OpenFWWF firmware that comes with Trisquel since I installed it. The *only* complaint I have had of Trisquel so far has been experiencing kernel panics with high bandwidth usage. Therefore, I wanted to find a way to get rid of these panics, and be able to take full advantage of my bandwidth without having to worry about my computer freezing up. I decided to try downloading the OpenFWWF source, and compiling it myself. This however, also requires a later kernel version than the one that Trisquel comes with, so I had to install a new kernel as well. Luckily, there's a *great* guide on how to do this that Leo Rockway has put together for gNewSense, which worked great in Trisquel:
http://leorockway.wordpress.com/category/lignux/distros/gnewsense-distros-lignux/ It's a very simple copy/paste walk-through that will get your wireless going again. There are however, a couple things I wanted to make note of. 1) I installed the package 'build-essential' before attempting this walk-through. I'm not sure if it's required - it is in Ubuntu, but not in gNewSense. I would recommend playing it safe and installing it just to be sure: sudo apt-get install build-essential 2) The kernel you will be downloading is 100% Free, so it will go well with the aim and goals of Trisquel. There is also a newer version available than what the guide uses. Instead of using the 2.6.30 kernel, I used the 2.6.30.7 kernel. You can use either one, but if you want to use the newer one, just substitute it in where the guide calls for it, like such: wget http://aligunduz.org/gNewSense/freedomshoppe/linux-image-2.6.30.7-libre-fshoppe1_i386.deb sudo dpkg -i linux-image-2.6.30.7-libre-fshoppe1_i386.deb 3) After going through this guide, and *BEFORE* rebooting, you will need to remove the 'openfwwf' package that is installed by default so your drivers won't conflict with one-another. You can do this in Synaptic, or via command line with: sudo apt-get remove openfwwf 4) When you remove the openfwwf package, it will remove the meta-packages 'trisquel' and 'trisquel-base'. This is fine. These are simply meta-packages and shouldn't affect your computer in any way. If you upgrade to Trisquel 3.0 when it comes out, you may have to reinstall them, but for now, you should be good to go. That's all there is to it! If you are encountering kernel panics from OpenFWWF, give this a try and see how it works for you. Enjoy!
_______________________________________________ Trisquel-users mailing list [email protected] http://listas.trisquel.info/mailman/listinfo/trisquel-users
