I finally got some time to flash. I followed your instructions together with
information on the libreboot site.
I get an Error while verification everytime I try to flash
root@beaglebone:~/libreboot_r20160907_util/flashrom/armv7l# ./flashrom -p
linux_spi:dev=/dev/spidev1.0,spispeed=512 -w
/root/libreboot_r20160902_grub_ga-g41m-es2l/ga-g41m-es2l_deqwertz_txtmode.rom
flashrom v0.9.9-unknown on Linux 3.8.13-bone79 (armv7l)
flashrom is free software, get the source code at https://flashrom.org
Calibrating delay loop... OK.
Found Macronix flash chip "MX25L8005/MX25L8006E/MX25L8008E/MX25V8005" (1024
kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00000000! Expected=0x5f, Found=0x00, failed
byte count from 0x00000000-0x000fffff: 0x9d
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
The hint with connectin pin 3 & 7 to 3V was useful. Without this the flash
chip is not found.
