Hallo Wilhelm, sehr gut, das Du dein Problem auf die Liste postest, so haben alles was davon - weiter so!
Hilfreich wäre die Angabe über deinen verwendete Grafikkarte. Dazu könntest Du uns die Ausgabe des Befehls: # lspci -k | grep VGA -A2 hier zukommen lassen. Sollte dein System den Befehl lspci nicht kennen, installiere noch das Paket sys-apps/pciutils Mein Schuss ins Blaue wäre, Du hast eine AMD oder ATI Grafikkarte, dann hast Du vermutlich das Problem unter 4.2. https://www.suse.com/releasenotes/i386/openSUSE/13.2/RELEASE-NOTES.en.html 4.1 Garbage on the Screen During Installation with the Nouveau Driver # On some systems with NVIDIA cards, the installer may show garbage on the top part of the screen due to problems with the default nouveau driver. If you are affected by this problem, you can disable the nouveau kernel module to run the installer and then enable it again once the system is installed or upgraded. To disable the kernel module, once you boot from the installation media, select the 'Installation' entry in grub and press 'e' to edit the parameters. Then go to the line starting with 'linux' (or 'linuxefi') and add brokenmodules=nouveau at the end. Now press F10 to continue booting with the new parameter. After the system is installed, you can re-enable the nouveau module by editing /etc/modprobe.d/50-blacklist.conf and removing the entry that blacklists nouveau. 4.2 Information About the FGLRX Driver # For more information about the AMD FGLRX drivers in openSUSE 13.2 and its status, see https://lizards.opensuse.org/2014/11/01/fglrx-warning-opensuse-13-2-tumbleweed/. Näher Beschrieben unter dem Link, doch leider nur in englisch für Dich, doch da helfen wir, falls sich das bestätigt. Gruß, Andy. Am Mittwoch, 21. Januar 2015, 19:17:45 schrieb Wilhelm Faber: > Hallo Troluger, > > nach einem Update von openSUSE 13.1 auf 13.2 > habe ich keine "farbigen" Bildschirm. > > Booting openSUSE > usw. > Linux - xgyf Login: > > in weisser Schrift und auf schwarzem Hintergrund > ist beim Start das Ergebnis. > > Yast kann ich als "root" starten. > Dito auch als Benutzer. > > Frage an Euch, wie/was muß ich tun/eingeben, damit ich meine Grafik > wieder aktivieren kann??? > > Danke für Eure Hilfe! > > > Viele Grüße an Euch > Wilhelm > _______________________________________________ > Trolug_trolug.de mailing list > [email protected] > https://ml01.ispgateway.de/mailman/listinfo/trolug_trolug.de
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Trolug_trolug.de mailing list [email protected] https://ml01.ispgateway.de/mailman/listinfo/trolug_trolug.de
