Brunello Ivan wrote: > First: > - on dl360 the included disks are connected to a smart* array. > You have to create a new RAID array. > The disks are not viewed directly, but via a lo
Can you please expand on the above? When you say "create a new RAID array" do you mean that it is necessary to set up the TSL 2.2 install to use software raid? This does not make sense to me as the purpose of the Compaq SMART array controller is to present a hardware RAID array to the OS as a single hardware device. At least this is the way that it works on RedHat 9.0. Thanks! > > Second: > - There are issue on dl 360 w/ kernel 2.6 > In short: TSL 2.2 works, TSL 3.0 no. > > Ivan > > > >>Date: Mon, 12 Sep 2005 13:23:31 +0100 >>From: "Nishil Mistry" <[EMAIL PROTECTED]> >>Subject: Compaq dl 360 >>To: <[email protected]> >>Message-ID: <[EMAIL PROTECTED]> >>Content-Type: text/plain; charset="us-ascii" >> >>The installer can not detect any of my scsi drives during the initial >>install. I have 2 two compaq 18.2GB ultra3 scsi drives. >>Loading any of the >>scsi drivers given by the installation makes no difference. >>Any advice? >> >> >> >>Does trustix have a HCL ? >> >> >> > > _______________________________________________ > tsl-discuss mailing list > [email protected] > http://lists.trustix.org/mailman/listinfo/tsl-discuss _______________________________________________ tsl-discuss mailing list [email protected] http://lists.trustix.org/mailman/listinfo/tsl-discuss
