I've got TSL 3.0 with latest updates installed on a Intel Celeron
running at 450Mhz with 192MB RAM. sshd is set up with standard settings.
Now, I've connected the server to my Gb switch (it's got a cheap 100Mbit
Realtek card) and my main computer is connected to the same switch using
Gbit.
Now to my problem.. I use putty for ssh connection, and it's really
slow. When I write commands etc everything lags behind.. What could be
the source for this lag? I feel like I'm on a 2800bps modem line to my
server..
The link is ok:
[EMAIL PROTECTED] ~# mii-tool eth0
eth0: negotiated 100baseTx-FD, link ok
from ifconfig:
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:275 errors:0 dropped:0 overruns:0 frame:0
TX packets:302 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:25776 (25.1 Kb) TX bytes:153056 (149.4 Kb)
Interrupt:10 Base address:0x2000
/Christopher
_______________________________________________
tsl-discuss mailing list
[email protected]
http://lists.trustix.org/mailman/listinfo/tsl-discuss
