> Ehlo :) Hi > > Ariën Huisken writes: > > > A long, long time ago I installed my TSL 2.0 server. This system needs an > > update. Now, I have moved away all important data to a backup > system, put in > > the TSL 2.2 CD, selected the install mode, but my Promise Ultra 133 TX > > controller doesn't work anymore. > > we need more info :) are the 4 disk configured as RAID ?? hmm.. cant > remember exactly if that model can be used without any RAID setting.. > anyway, if used with RAID you have to load PDC ataraid kernel module.. > the pdc driver is compiled in... > beers
Well, I think it's solved (for me) already. (btw, the controller is just a simple IDE 2-port controller, no RAID, I use sw-raid with it.) I put the controller in a already installed 2.2 system and it works! So only during install, the controller is not present, but after install I can use it. Installed TSL 2.2 on 2 HDD's (/dev/md0) and after install, created /dev/md1 raid 5 on the 4 HDD's connected to the controller. It's not a big issue, only for people who want to boot from it. I guess I added the controller after the install of the 2.0 system, but as I said, that was a long time ago... Thanks anyway for your qiuck reply :) > > Fremen > > System: > > 2xIDE HDD on the mainboard controller (the work) > > 4xIDE HDD on the Promise controller (used to work in 2.0) > > > I booted the system in 2.0 (still exists on the HDD's) and the > controller is > > working. Looked if I had loaded a module for it, but lsmod shows no special > > modules for this card. I don't remember the install of the 2.0 > system, but I'm > > almost sure I didn't do anything non-standard to make this controller work. > > > Please, anyone has a suggestion where to look? > > > --- > > Ariën > --- Ariën _______________________________________________ tsl-discuss mailing list [email protected] http://lists.trustix.org/mailman/listinfo/tsl-discuss
