Good news. I'd prefer TSL policy (and indeed use TSL whenever possible). Just needed services, and almost none active by default. I name TSL the "OpenBSD" of linux distros.
But sometimes circumstances force me to use a more common distro, and I'd prefer CentOS, due to its "RHELish" nature (and my RedHat Backgorund). Ivan On 5/23/07, [EMAIL PROTECTED] < [EMAIL PROTECTED]> wrote: > > Date: Wed, 23 May 2007 15:50:27 +0200 > From: "2bujo" <[EMAIL PROTECTED]> > Subject: Re: Fw: TSL & Hardware - FAILURE ---> SOLVED > To: Cristi?n Mej?a <[EMAIL PROTECTED]> > Cc: [email protected] > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="iso-8859-1" > > Hi Cristian > good news...i've solved the problem. > I "RTFM" and check the dat, all jumpers were right, the scsi terminator > was right...scsi id usually is 6... > umhh...start again, check adaptec scsi bios (ctrl+a to start scsi > utility)...watching around parameters i found a channel ID 7 !!!!!! FOUND ! > change to 6 save & reboot... DAT recognized...(more that one exactly...one > for each channel)...also CentOS found my dat, i did some test with mt and it > works nice. > Umh...the only trouble is that i've not an home partition on the LVM...may > be usefull to install again or not ? > Also, probably i've to use: pci=noacpi because it cause me "kernel > disabling irq # xxx" (xxx is one of the irq assigned to uhci_hcd, usb, but i > think related to acpi also). > I'm testing centos...not so bad...but i think there are too much services > at start up (bluetooth on a server ?) > I don't like much red hat GPO, i prefer TSL policy, every new user add is > member of users group !!! > Ok...i think i can use this server...more or less now i've solved every > problem... > Cristian, thank you very much for your suggest and patience, > > Buena suerte > > Bujo > _______________________________________________ tsl-discuss mailing list [email protected] http://lists.trustix.org/mailman/listinfo/tsl-discuss
