-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 What are the permissions on /dev/dsp? You can find out using either "stat /dev/dsp" or "ls -l /dev/dsp" (without quotes of course). Ideally permissions should be 666, also known as crw-rw-rw- (and yes I know this is not the most secure, however on a single use machine its fine). If they aren't you can change them using "chmod 666 /dev/dsp". Failing that, make sure the proper module is loaded using "lsmod". I think the module for your card is es1370. If its not loaded you can load it using "insmod es1370". And just to cover all posiblities, your speakers are on right? (don't worry, I've done much dumber things)
Hope that helps somewhat. Jordan Morren wrote: > I installed RH 8.0 on Thursday and everything's been working great > except I cannot get my sound card to work. I have an Ensoniq 5880 > AudioPCI sound card which is supposed to be supported, and it is > detected, but no such luck with the sound. There's no test sound, no CD > sound, no system sound or anything. I've checked and rechecked all the > connections to make sure everything's plugged in correctly and still > nothing. Any ideas? Thanks for any help! > > ~Jordan Morren > x4878 - -- Peter Snoblin http://quantumandroid.webhop.org/ http://strangefun.dyndns.org:8080/ [EMAIL PROTECTED] [EMAIL PROTECTED] AIM: CHA1512 jabber: [EMAIL PROTECTED] -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQE9ohDR6bAd4ZUmLH0RAgpcAJ9McfprCz8xzp8o/vN6VCZ3RTyd6ACfaJlT LHB/PCWkPS6EhZIuXGI9mpc= =xj3N -----END PGP SIGNATURE----- ----------------------------------------------------------------- To get off this list, send email to [EMAIL PROTECTED] with Subject: unsubscribe -----------------------------------------------------------------
