mpoeschl 02/03/15 08:57:23
Modified: conf build.xml
Added: conf/master Fulcrum.master
conf Fulcrum.properties
Log:
add Fulcrum config to be used with turbine-2
configuration for services which cannot be used should be removed
Revision Changes Path
1.1 jakarta-turbine-2/conf/master/Fulcrum.master
Index: Fulcrum.master
===================================================================
# -------------------------------------------------------------------
#
# S E R V I C E S
#
# -------------------------------------------------------------------
# Classes for Turbine Services should be defined here.
# Format: services.[name].classname=[implementing class]
#
# To specify properties of a service use the following syntax:
# service.[name].[property]=[value]
#
# The order that these services is listed is important! The
# order that is stated here is the order in which the services
# will be initialized. Keep this is mind if you have services
# that depend on other services during initialization.
# -------------------------------------------------------------------
services.FactoryService.classname=org.apache.fulcrum.factory.TurbineFactoryService
services.PoolService.classname=org.apache.fulcrum.pool.TurbinePoolService
services.MimeTypeService.classname=org.apache.fulcrum.mimetype.TurbineMimeTypeService
services.SchedulerService.classname=org.apache.fulcrum.schedule.TurbineSchedulerService
services.XmlRpcService.classname=org.apache.fulcrum.xmlrpc.TurbineXmlRpcService
services.UploadService.classname=org.apache.fulcrum.upload.TurbineUploadService
services.SecurityService.classname=org.apache.fulcrum.security.impl.db.DBSecurityService
services.XSLTService.classname=org.apache.fulcrum.xslt.TurbineXSLTService
services.BSFService.classname=org.apache.fulcrum.bsf.TurbineBSFService
services.GlobalCacheService.classname=org.apache.fulcrum.cache.TurbineGlobalCacheService
services.TemplateService.classname=org.apache.fulcrum.template.TurbineTemplateService
services.LocalizationService.classname=org.apache.fulcrum.localization.TurbineLocalizationService
services.IntakeService.classname=org.apache.fulcrum.intake.TurbineIntakeService
# Turn on the appropriate template service.
@TEMPLATE_SERVICE@
# -------------------------------------------------------------------
#
# C A C H E S E R V I C E
#
# -------------------------------------------------------------------
# Interval at which the cache will be checked. The default is
# 5000ms or 5 seconds.
services.GlobalCacheService.cacheCheckFrequency = 5000
# -------------------------------------------------------------------
#
# B S F S E R V I C E
#
# -------------------------------------------------------------------
services.BSFService.scriptsDirectory = WEB-INF/scripts
services.BSFService.defaultExtension = py
# -------------------------------------------------------------------
#
# T E M P L A T E S E R V I C E
#
# -------------------------------------------------------------------
# There is no configuration anymore, just an abstract front
# end to underlying template engines like velocity, webmacro,
# and JSP.
# -------------------------------------------------------------------
#
# V E L O C I T Y S E R V I C E
#
# -------------------------------------------------------------------
# The location of Velocity configuration file, relative to webapp root
# These properties will override the default properties set by Velocity.
# You should specify the path to the templates directories as well as
# the path to the log file and they should also be relative to webapp root
services.VelocityService.template.extension=vm
services.VelocityService.default.page.template = /Default.vm
services.VelocityService.default.layout.template = /Default.vm
services.VelocityService.runtime.log=/logs/velocity.log
#services.VelocityService.input.encoding=UTF-8
services.VelocityService.velocimacro.library = GlobalMacros.vm
services.VelocityService.resource.loader = file
services.VelocityService.file.resource.loader.description = Velocity File Resource
Loader
services.VelocityService.file.resource.loader.class =
org.apache.velocity.runtime.resource.loader.FileResourceLoader
services.VelocityService.file.resource.loader.path = @TEMPLATE_PATH@
services.VelocityService.file.resource.loader.cache = false
services.VelocityService.file.resource.loader.modificationCheckInterval = 2
services.VelocityService.resource.loader = classpath
services.VelocityService.classpath.resource.loader.description = Velocity Classpath
Resource Loader
services.VelocityService.classpath.resource.loader.class =
org.apache.velocity.runtime.resource.loader.ClasspathResourceLoader
services.VelocityService.eventCartridge.classes =
services.VelocityService.earlyInit = true
# -------------------------------------------------------------------
#
# J S P S E R V I C E
#
# -------------------------------------------------------------------
services.JspService.template.extension=jsp
services.JspService.default.page.template = /Default.jsp
services.JspService.default.layout.template = /Default.jsp
services.JspService.templates = @TEMPLATE_PATH@
services.JspService.buffer.size = 8192
services.JspService.earlyInit = true
# -------------------------------------------------------------------
#
# U P L O A D S E R V I C E
#
# -------------------------------------------------------------------
# Whether the files should be automatically picked up by
# ParameterParser.
services.UploadService.automatic=true
#
# The directory where files will be temporarily stored.
#
services.UploadService.repository=.
#
# The maximum size of a request that will be processed.
#
services.UploadService.size.max=1048576
#
# The maximum size of a request that will have it's elements cached in
# memory by TurbineUploadService class.
#
services.UploadService.size.threshold=0
# -------------------------------------------------------------------
#
# L O C A L I Z A T I O N S E R V I C E
#
# -------------------------------------------------------------------
# Default ResourceBundle and language/country codes used by the
# TurbineLocalizationService.
#
services.LocalizationService.locale.default.bundle=@LOCALE_DEFAULT_BUNDLE@
services.LocalizationService.locale.default.language=@LOCALE_DEFAULT_LANGUAGE@
services.LocalizationService.locale.default.country=@LOCALE_DEFAULT_COUNTRY@
#
# This will set the charset= portion of the ContentType: header.
# Leave commented out unless you want to return stuff as a different
# charset.
#
# services.LocalizationService.locale.default.charset=
# -------------------------------------------------------------------
#
# M I M E T Y P E S E R V I C E
#
# -------------------------------------------------------------------
# This property specifies a file containing mappings between MIME
# content types and the corresponding file name extensions. The
# service itself contains a hardcoded set of most common mappings.
# The file must use the same syntax as the mime.types file of
# the Apache Server, i.e.
# <mimetype> <ext1> <ext2>...
#
#services.MimeTypeService.mime.types=/WEB-INF/conf/mime.types
# This property specifies a file containing mappings between locales
# and the corresponding character encodings. The service itself
# contains a hardcoded set of most common mappings.
# The file should use the Java property file syntax, i.e.
# <lang_country_variant>=<charset>
#
#services.MimeTypeService.charsets=/WEB-INF/conf/charset.properties
# -------------------------------------------------------------------
#
# S C H E D U L E R S E R V I C E
#
# -------------------------------------------------------------------
#
# Set enabled to true to start the scheduler.
#
# Default = false
#
services.SchedulerService.earlyInit = false
# -------------------------------------------------------------------
#
# S E C U R I T Y S E R V I C E
#
# -------------------------------------------------------------------
#
# This is the class that implements the User interface.
# You want to override this setting only if you want your User
# implementation to provide application specific addtional
# functionality.
#
# Default: org.apache.fulcrum.security.impl.db.entity.TurbineUser
#
services.SecurityService.user.class=org.apache.fulcrum.security.impl.db.entity.TurbineUser
#
# This setting is DBSecurityService specific - this class is consulted for the names
# of the columns in the users' tables for the purpose of creating join queries.
# If you use your own User implementation in conjunction with DBSecurityService,
# it's peer class must implement org.apache.turbine.om.security.peer.UserPeer
interface,
# and you need to specify the name of the peer class here.
#
# Default: org.apache.fulcrum.security.impl.db.entity.TurbineUserPeer
#
services.SecurityService.userPeer.class=org.apache.fulcrum.security.impl.db.entity.TurbineUserPeer
#
# This is the class that implements UserManager interface.
# Override this setting if you want your User information stored
# on a different medium (LADP directory is a good example).
# Default implementation uses Peers and a relational database .
#
services.SecurityService.user.manager=org.apache.fulcrum.security.impl.db.DBUserManager
#
# This is used by the SecurityService to make the password checking
# secure. When enabled, passwords are transformed by a one-way
# function into a sequence of bytes that is base64 encoded.
# It is impossible to guess the plain-text form of the password
# from the representation. When user logs in, the entered password
# is transformed the same way and then compared with stored value.
#
# Default: false
#
services.SecurityService.secure.passwords=false
#
# This property lets you choose what digest algorithm will be used
# for encrypting passwords. Check documentation of your JRE for
# available algorithms.
#
# Default: SHA
#
services.SecurityService.secure.passwords.algorithm=SHA
# Configuration for the LDAP Security Service implementation
#services.SecurityService.ldap.security.athentication=simple
#services.SecurityService.ldap.port=<LDAP PORT>
#services.SecurityService.ldap.host=<LDAP HOST>
#services.SecurityService.ldap.admin.username=<ADMIN USERNAME>
#services.SecurityService.ldap.admin.password=<ADMIN PASSWORD>
#services.SecurityService.ldap.user.basesearch=<SEARCH PATTERN>
#services.SecurityService.ldap.user.search.filter=<SEARCH FILTER>
#services.SecurityService.ldap.dn.attribute=userPrincipalName
#services.SecurityService.ldap.provider=com.sun.jndi.ldap.LdapCtxFactory
# -------------------------------------------------------------------
#
# X M L R P C S E R V I C E
#
# -------------------------------------------------------------------
# This property specifies which class should be used to parse
# xml for XmlRpc functionality.
#
# Default: org.apache.xerces.parsers.SAXParser
services.XmlRpcService.parser=org.apache.xerces.parsers.SAXParser
# This property specifies which port the server part of the XmlRpc
# should listen, if it is active.
#
# Default: 12345
services.XmlRpcService.port=12345
# If any classes are specified here, the Service will create an
# instance of them here and start up a listener on the specified
# port.
#
# Note that the handlers demonstrated are not very useful. You
# will have to invent your own services. They do however
# illustrate that any class with a default constructor can be
# added here
#
# The handler parameter without further extension determines
# the default handler for the service
#
# Default: no classes are specified by default
#services.XmlRpcService.handler.$default=java.util.Hashtable
#services.XmlRpcService.handler.stringhandler=java.lang.String
# The following properties allow the transfer of data between
# separate Turbine applications running on different servers.
# This allows B2B type behavior such as sending database
# updates in the form of XML or whatever type of data
# that needs to be shared between Turbine applications
# running on separate servers.
services.XmlRpcService.handler.file = org.apache.fulcrum.xmlrpc.util.FileHandler
services.XmlRpcService.paranoid = false
services.XmlRpcService.acceptClient = 192.168.1.*
services.XmlRpcService.denyClient =
# Do we want a secure server
services.XmlRpcService.secure.server = false
# Secure server options
services.XmlRpcService.secure.server.option.java.protocol.handler.pkgs = \
com.sun.net.ssl.internal.www.protocol
services.XmlRpcService.secure.server.option.security.provider = \
com.sun.net.ssl.internal.ssl.Provider
services.XmlRpcService.secure.server.option.security.protocol = TLS
# You probably want to keep your key stores and trust stores
# clear out of your webapp.
services.XmlRpcService.secure.server.option.javax.net.ssl.keyStore = /tmp/keystore
services.XmlRpcService.secure.server.option.javax.net.ssl.keyStoreType = jks
services.XmlRpcService.secure.server.option.javax.net.ssl.keyStorePassword = password
services.XmlRpcService.secure.server.option.javax.net.ssl.trustStore =
/tmp/truststore
services.XmlRpcService.secure.server.option.javax.net.ssl.trustStoreType = jks
services.XmlRpcService.secure.server.option.javax.net.ssl.trustStorePassword =
password
services.XmlRpcService.secure.server.option.sun.ssl.keymanager.type = SunX509
services.XmlRpcService.secure.server.option.sun.ssl.trust.manager.type = SunX509
# These values should be set to 'all' for debugging purposes.
services.XmlRpcService.secure.server.option.javax.net.debug = none
services.XmlRpcService.secure.server.option.java.security.debug = none
services.XmlRpcService.earlyInit = true
# -------------------------------------------------------------------
#
# P O O L S E R V I C E
#
# -------------------------------------------------------------------
# Default capacity of pools of the Object pooling service.
#
# Default: 128
services.PoolService.pool.capacity = 128
# Class specific capacities used instead of the default if specified.
#
#services.PoolService.pool.capacity.org.apache.turbine.services.rundata.DefaultTurbineRunData=512
# -------------------------------------------------------------------
#
# F A C T O R Y S E R V I C E
#
# -------------------------------------------------------------------
# A comma separated list of classloaders (very optional)
#
# Example: org.foo.bar.MyClassLoader, org.ack.joe.YourClassLoader
#
#services.FactoryService.class.loaders=
# Default factory to use when no custom factory is specified.
#
# Example: org.foo.bar.DefaultFactory
#
#services.FactoryService.factory.default=
# Customized factories to be used instead of the default factory.
# E.g. to instantiate XML parsers, SSL sockets, etc., which require
# specific instantiation not supported by the default factory.
# The property name is prefixed with "factory" followed by the
# name of the production class. The value is the class name of
# the factory implementing the Factory interface. The factory
# will be instantiated by using the service itself.
#
# Examples:
#
#
services.FactoryService.factory.javax.xml.parsers.DocumentBuilder=org.foo.xml.DomBuilderFactory
#
services.FactoryService.factory.javax.xml.parsers.SAXParser=org.foo.xml.SaxParserFactory
#
services.FactoryService.factory.java.net.ServerSocket=org.foo.net.SslServerSocketFactory
#--------------------------------------------------------------------
#
# X S L T S E R V I C E
#
#--------------------------------------------------------------------
services.XSLTService.path = /path/to/stylesheets
services.XSLTService.cache = false
# -------------------------------------------------------------------
#
# I N T A K E S E R V I C E
#
# -------------------------------------------------------------------
# The location of the xml file specifying valid inputs
# -------------------------------------------------------------------
services.IntakeService.xml.path=@INTAKE_DESCRIPTOR@
1.5 +13 -4 jakarta-turbine-2/conf/build.xml
Index: build.xml
===================================================================
RCS file: /home/cvs/jakarta-turbine-2/conf/build.xml,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -r1.4 -r1.5
--- build.xml 12 Oct 2001 20:32:18 -0000 1.4
+++ build.xml 15 Mar 2002 16:57:23 -0000 1.5
@@ -20,6 +20,9 @@
<property name="master" value="${master.home}/TurbineResources.master"/>
<property name="copy" value="${target.dir}/TurbineResources.properties"/>
+ <property name="fulcrum.master" value="${master.home}/Fulcrum.master"/>
+ <property name="fulcrum.copy" value="${target.dir}/Fulcrum.properties"/>
+
<!-- =================================================================== -->
<!-- T R P R O P S W I T H D B V A L U E S -->
<!-- =================================================================== -->
@@ -29,11 +32,14 @@
<!-- =================================================================== -->
<target name="tr-props-with-db-values" depends="configure,configure-db">
-
+
<echo message="Creating TurbineResources ..."/>
<delete file="${copy}"/>
+ <delete file="${fulcrum.copy}"/>
+
<copy file="${master}" tofile="${copy}" filtering="on"/>
-
+ <copy file="${fulcrum.master}" tofile="${fulcrum.copy}" filtering="on"/>
+
</target>
<!-- =================================================================== -->
@@ -47,11 +53,14 @@
<!-- =================================================================== -->
<target name="tr-props-without-db-values" depends="configure">
-
+
<echo message="Creating TurbineResources ..."/>
<delete file="${copy}"/>
+ <delete file="${fulcrum.copy}"/>
+
<copy file="${master}" tofile="${copy}" filtering="on"/>
-
+ <copy file="${fulcrum.master}" tofile="${fulcrum.copy}" filtering="on"/>
+
</target>
<!-- =================================================================== -->
1.1 jakarta-turbine-2/conf/Fulcrum.properties
Index: Fulcrum.properties
===================================================================
# -------------------------------------------------------------------
#
# S E R V I C E S
#
# -------------------------------------------------------------------
# Classes for Turbine Services should be defined here.
# Format: services.[name].classname=[implementing class]
#
# To specify properties of a service use the following syntax:
# service.[name].[property]=[value]
#
# The order that these services is listed is important! The
# order that is stated here is the order in which the services
# will be initialized. Keep this is mind if you have services
# that depend on other services during initialization.
# -------------------------------------------------------------------
services.FactoryService.classname=org.apache.fulcrum.factory.TurbineFactoryService
services.PoolService.classname=org.apache.fulcrum.pool.TurbinePoolService
services.MimeTypeService.classname=org.apache.fulcrum.mimetype.TurbineMimeTypeService
services.SchedulerService.classname=org.apache.fulcrum.schedule.TurbineSchedulerService
services.XmlRpcService.classname=org.apache.fulcrum.xmlrpc.TurbineXmlRpcService
services.UploadService.classname=org.apache.fulcrum.upload.TurbineUploadService
services.SecurityService.classname=org.apache.fulcrum.security.impl.db.DBSecurityService
#services.DatabaseService.classname=org.apache.fulcrum.db.TurbineDatabaseService
services.XSLTService.classname=org.apache.fulcrum.xslt.TurbineXSLTService
services.BSFService.classname=org.apache.fulcrum.bsf.TurbineBSFService
services.GlobalCacheService.classname=org.apache.fulcrum.cache.TurbineGlobalCacheService
services.TemplateService.classname=org.apache.fulcrum.template.TurbineTemplateService
services.LocalizationService.classname=org.apache.fulcrum.localization.TurbineLocalizationService
services.IntakeService.classname=org.apache.fulcrum.intake.TurbineIntakeService
# Turn on the appropriate template service.
services.VelocityService.classname=org.apache.turbine.services.velocity.TurbineVelocityService
# -------------------------------------------------------------------
#
# D A T A B A S E S E R V I C E
#
# -------------------------------------------------------------------
# These are your database settings. Look in the
# org.apache.turbine.util.db.pool.* packages for more information.
# The default driver for Turbine is for MySQL.
#
# The parameters to connect to the default database. You MUST
# configure these properly.
# -------------------------------------------------------------------
services.DatabaseService.database.default=default
services.DatabaseService.database.default.driver=org.gjt.mm.mysql.Driver
services.DatabaseService.database.default.url=jdbc:mysql://localhost:3306/Turbine
services.DatabaseService.database.default.username=username
services.DatabaseService.database.default.password=password
# The number of database connections to cache per ConnectionPool
# instance (specified per database).
services.DatabaseService.database.default.maxConnections=3
# The amount of time (in milliseconds) that database connections will be
# cached (specified per database).
#
# Default: one hour = 60 * 60 * 1000
services.DatabaseService.database.default.expiryTime=3600000
# The amount of time (in milliseconds) a connection request will have to wait
# before a time out occurs and an error is thrown.
#
# Default: ten seconds = 10 * 1000
services.DatabaseService.database.connectionWaitTimeout=10000
# The interval (in milliseconds) between which the PoolBrokerService logs
# the status of it's ConnectionPools.
#
# Default: No logging = 0 = 0 * 1000
services.DatabaseService.database.logInterval=0
# These are the supported JDBC drivers and their associated Turbine
# adapter. These properties are used by the DBFactory. You can add
# all the drivers you want here.
services.DatabaseService.database.adapter=DBMM
services.DatabaseService.database.adapter.DBMM=org.gjt.mm.mysql.Driver
# Determines if the quantity column of the IDBroker's id_table should
# be increased automatically if requests for ids reaches a high
# volume.
services.DatabaseService.idbroker.cleverquantity=true
# Determines if IDBroker should prefetch IDs or not. If set to false
# this property has the effect of shutting off the housekeeping thread
# that attempts to prefetch the id's. It also sets the # of id's grabbed
# per request to 1 regardless of the settings in the database.
# Default: true
services.DatabaseService.idbroker.prefetch=true
services.DatabaseService.earlyInit = true
# -------------------------------------------------------------------
#
# C A C H E S E R V I C E
#
# -------------------------------------------------------------------
# Interval at which the cache will be checked. The default is
# 5000ms or 5 seconds.
services.GlobalCacheService.cacheCheckFrequency = 5000
# -------------------------------------------------------------------
#
# B S F S E R V I C E
#
# -------------------------------------------------------------------
services.BSFService.scriptsDirectory = WEB-INF/scripts
services.BSFService.defaultExtension = py
# -------------------------------------------------------------------
#
# T E M P L A T E S E R V I C E
#
# -------------------------------------------------------------------
# There is no configuration anymore, just an abstract front
# end to underlying template engines like velocity, webmacro,
# and JSP.
# -------------------------------------------------------------------
#
# V E L O C I T Y S E R V I C E
#
# -------------------------------------------------------------------
# The location of Velocity configuration file, relative to webapp root
# These properties will override the default properties set by Velocity.
# You should specify the path to the templates directories as well as
# the path to the log file and they should also be relative to webapp root
services.VelocityService.template.extension=vm
services.VelocityService.default.page.template = /Default.vm
services.VelocityService.default.layout.template = /Default.vm
services.VelocityService.runtime.log=/logs/velocity.log
#services.VelocityService.input.encoding=UTF-8
services.VelocityService.velocimacro.library = GlobalMacros.vm
services.VelocityService.resource.loader = file
services.VelocityService.file.resource.loader.description = Velocity File Resource
Loader
services.VelocityService.file.resource.loader.class =
org.apache.velocity.runtime.resource.loader.FileResourceLoader
services.VelocityService.file.resource.loader.path = /templates/app
services.VelocityService.file.resource.loader.cache = false
services.VelocityService.file.resource.loader.modificationCheckInterval = 2
services.VelocityService.resource.loader = classpath
services.VelocityService.classpath.resource.loader.description = Velocity Classpath
Resource Loader
services.VelocityService.classpath.resource.loader.class =
org.apache.velocity.runtime.resource.loader.ClasspathResourceLoader
services.VelocityService.eventCartridge.classes =
services.VelocityService.earlyInit = true
# -------------------------------------------------------------------
#
# J S P S E R V I C E
#
# -------------------------------------------------------------------
services.JspService.template.extension=jsp
services.JspService.default.page.template = /Default.jsp
services.JspService.default.layout.template = /Default.jsp
services.JspService.templates = /templates/app
services.JspService.buffer.size = 8192
services.JspService.earlyInit = true
# -------------------------------------------------------------------
#
# U P L O A D S E R V I C E
#
# -------------------------------------------------------------------
# Whether the files should be automatically picked up by
# ParameterParser.
services.UploadService.automatic=true
#
# The directory where files will be temporarily stored.
#
services.UploadService.repository=.
#
# The maximum size of a request that will be processed.
#
services.UploadService.size.max=1048576
#
# The maximum size of a request that will have it's elements cached in
# memory by TurbineUploadService class.
#
services.UploadService.size.threshold=0
# -------------------------------------------------------------------
#
# L O C A L I Z A T I O N S E R V I C E
#
# -------------------------------------------------------------------
# Default ResourceBundle and language/country codes used by the
# TurbineLocalizationService.
#
services.LocalizationService.locale.default.bundle=MyBundle
services.LocalizationService.locale.default.language=en
services.LocalizationService.locale.default.country=US
#
# This will set the charset= portion of the ContentType: header.
# Leave commented out unless you want to return stuff as a different
# charset.
#
# services.LocalizationService.locale.default.charset=
# -------------------------------------------------------------------
#
# M I M E T Y P E S E R V I C E
#
# -------------------------------------------------------------------
# This property specifies a file containing mappings between MIME
# content types and the corresponding file name extensions. The
# service itself contains a hardcoded set of most common mappings.
# The file must use the same syntax as the mime.types file of
# the Apache Server, i.e.
# <mimetype> <ext1> <ext2>...
#
#services.MimeTypeService.mime.types=/WEB-INF/conf/mime.types
# This property specifies a file containing mappings between locales
# and the corresponding character encodings. The service itself
# contains a hardcoded set of most common mappings.
# The file should use the Java property file syntax, i.e.
# <lang_country_variant>=<charset>
#
#services.MimeTypeService.charsets=/WEB-INF/conf/charset.properties
# -------------------------------------------------------------------
#
# S C H E D U L E R S E R V I C E
#
# -------------------------------------------------------------------
#
# Set enabled to true to start the scheduler.
#
# Default = false
#
services.SchedulerService.earlyInit = false
# -------------------------------------------------------------------
#
# S E C U R I T Y S E R V I C E
#
# -------------------------------------------------------------------
#
# This is the class that implements the User interface.
# You want to override this setting only if you want your User
# implementation to provide application specific addtional
# functionality.
#
# Default: org.apache.fulcrum.security.impl.db.entity.TurbineUser
#
services.SecurityService.user.class=org.apache.fulcrum.security.impl.db.entity.TurbineUser
#
# This setting is DBSecurityService specific - this class is consulted for the names
# of the columns in the users' tables for the purpose of creating join queries.
# If you use your own User implementation in conjunction with DBSecurityService,
# it's peer class must implement org.apache.turbine.om.security.peer.UserPeer
interface,
# and you need to specify the name of the peer class here.
#
# Default: org.apache.fulcrum.security.impl.db.entity.TurbineUserPeer
#
services.SecurityService.userPeer.class=org.apache.fulcrum.security.impl.db.entity.TurbineUserPeer
#
# This is the class that implements UserManager interface.
# Override this setting if you want your User information stored
# on a different medium (LADP directory is a good example).
# Default implementation uses Peers and a relational database .
#
services.SecurityService.user.manager=org.apache.fulcrum.security.impl.db.DBUserManager
#
# This is used by the SecurityService to make the password checking
# secure. When enabled, passwords are transformed by a one-way
# function into a sequence of bytes that is base64 encoded.
# It is impossible to guess the plain-text form of the password
# from the representation. When user logs in, the entered password
# is transformed the same way and then compared with stored value.
#
# Default: false
#
services.SecurityService.secure.passwords=false
#
# This property lets you choose what digest algorithm will be used
# for encrypting passwords. Check documentation of your JRE for
# available algorithms.
#
# Default: SHA
#
services.SecurityService.secure.passwords.algorithm=SHA
# Configuration for the LDAP Security Service implementation
#services.SecurityService.ldap.security.athentication=simple
#services.SecurityService.ldap.port=<LDAP PORT>
#services.SecurityService.ldap.host=<LDAP HOST>
#services.SecurityService.ldap.admin.username=<ADMIN USERNAME>
#services.SecurityService.ldap.admin.password=<ADMIN PASSWORD>
#services.SecurityService.ldap.user.basesearch=<SEARCH PATTERN>
#services.SecurityService.ldap.user.search.filter=<SEARCH FILTER>
#services.SecurityService.ldap.dn.attribute=userPrincipalName
#services.SecurityService.ldap.provider=com.sun.jndi.ldap.LdapCtxFactory
# -------------------------------------------------------------------
#
# X M L R P C S E R V I C E
#
# -------------------------------------------------------------------
# This property specifies which class should be used to parse
# xml for XmlRpc functionality.
#
# Default: org.apache.xerces.parsers.SAXParser
services.XmlRpcService.parser=org.apache.xerces.parsers.SAXParser
# This property specifies which port the server part of the XmlRpc
# should listen, if it is active.
#
# Default: 12345
services.XmlRpcService.port=12345
# If any classes are specified here, the Service will create an
# instance of them here and start up a listener on the specified
# port.
#
# Note that the handlers demonstrated are not very useful. You
# will have to invent your own services. They do however
# illustrate that any class with a default constructor can be
# added here
#
# The handler parameter without further extension determines
# the default handler for the service
#
# Default: no classes are specified by default
#services.XmlRpcService.handler.$default=java.util.Hashtable
#services.XmlRpcService.handler.stringhandler=java.lang.String
# The following properties allow the transfer of data between
# separate Turbine applications running on different servers.
# This allows B2B type behavior such as sending database
# updates in the form of XML or whatever type of data
# that needs to be shared between Turbine applications
# running on separate servers.
services.XmlRpcService.handler.file = org.apache.fulcrum.xmlrpc.util.FileHandler
services.XmlRpcService.paranoid = false
services.XmlRpcService.acceptClient = 192.168.1.*
services.XmlRpcService.denyClient =
# Do we want a secure server
services.XmlRpcService.secure.server = false
# Secure server options
services.XmlRpcService.secure.server.option.java.protocol.handler.pkgs = \
com.sun.net.ssl.internal.www.protocol
services.XmlRpcService.secure.server.option.security.provider = \
com.sun.net.ssl.internal.ssl.Provider
services.XmlRpcService.secure.server.option.security.protocol = TLS
# You probably want to keep your key stores and trust stores
# clear out of your webapp.
services.XmlRpcService.secure.server.option.javax.net.ssl.keyStore = /tmp/keystore
services.XmlRpcService.secure.server.option.javax.net.ssl.keyStoreType = jks
services.XmlRpcService.secure.server.option.javax.net.ssl.keyStorePassword = password
services.XmlRpcService.secure.server.option.javax.net.ssl.trustStore =
/tmp/truststore
services.XmlRpcService.secure.server.option.javax.net.ssl.trustStoreType = jks
services.XmlRpcService.secure.server.option.javax.net.ssl.trustStorePassword =
password
services.XmlRpcService.secure.server.option.sun.ssl.keymanager.type = SunX509
services.XmlRpcService.secure.server.option.sun.ssl.trust.manager.type = SunX509
# These values should be set to 'all' for debugging purposes.
services.XmlRpcService.secure.server.option.javax.net.debug = none
services.XmlRpcService.secure.server.option.java.security.debug = none
services.XmlRpcService.earlyInit = true
# -------------------------------------------------------------------
#
# P O O L S E R V I C E
#
# -------------------------------------------------------------------
# Default capacity of pools of the Object pooling service.
#
# Default: 128
services.PoolService.pool.capacity = 128
# Class specific capacities used instead of the default if specified.
#
#services.PoolService.pool.capacity.org.apache.turbine.services.rundata.DefaultTurbineRunData=512
# -------------------------------------------------------------------
#
# F A C T O R Y S E R V I C E
#
# -------------------------------------------------------------------
# A comma separated list of classloaders (very optional)
#
# Example: org.foo.bar.MyClassLoader, org.ack.joe.YourClassLoader
#
#services.FactoryService.class.loaders=
# Default factory to use when no custom factory is specified.
#
# Example: org.foo.bar.DefaultFactory
#
#services.FactoryService.factory.default=
# Customized factories to be used instead of the default factory.
# E.g. to instantiate XML parsers, SSL sockets, etc., which require
# specific instantiation not supported by the default factory.
# The property name is prefixed with "factory" followed by the
# name of the production class. The value is the class name of
# the factory implementing the Factory interface. The factory
# will be instantiated by using the service itself.
#
# Examples:
#
#
services.FactoryService.factory.javax.xml.parsers.DocumentBuilder=org.foo.xml.DomBuilderFactory
#
services.FactoryService.factory.javax.xml.parsers.SAXParser=org.foo.xml.SaxParserFactory
#
services.FactoryService.factory.java.net.ServerSocket=org.foo.net.SslServerSocketFactory
#--------------------------------------------------------------------
#
# X S L T S E R V I C E
#
#--------------------------------------------------------------------
services.XSLTService.path = /path/to/stylesheets
services.XSLTService.cache = false
# -------------------------------------------------------------------
#
# I N T A K E S E R V I C E
#
# -------------------------------------------------------------------
# The location of the xml file specifying valid inputs
# -------------------------------------------------------------------
services.IntakeService.xml.path=@INTAKE_DESCRIPTOR@
--
To unsubscribe, e-mail: <mailto:[EMAIL PROTECTED]>
For additional commands, e-mail: <mailto:[EMAIL PROTECTED]>
