Hi,

I played my hunch, T2.3 seems to only tolerate 1 application under webapps
directory. I moved the other 2 T2.3 applications out from under webapps and
the one remaining now initialises just fine. A bit of a limitation.

David

> -----Original Message-----
> From: David Wynter [mailto:[EMAIL PROTECTED]
> Sent: 04 September 2003 20:14
> To: Turbine Users List; [EMAIL PROTECTED]
> Subject: RE: Torque as an Avalon Component [was: Re: Turbine Error]
>
>
> Hi,
>
> My objective is to get 2 Avalon components working, Torque and a Scheduler
> based on Quartz. When both failed I fell back to try to get just
> the Torque
> component to work. I discovered that T2.3 had been released and
> upgraded to
> that. Also Torque 3.1. Then I discovered that when I traced through the
> Avalon component configuration into
> TorqueComponent.configure(Configuration
> configuration) that there seemed to be a misalignment between
> Torque source
> I had attached the jar to while tracing. So I downloaded the Torque 3.1
> source and built it using maven b10. This made no difference. Now this was
> outside anything I had ever seen, call to that method on line 148 enters
> code in TorqueComponent at line 126?
>
> So I tried downloading and building T2.3 release from
> http://www.apache.org/dist/jakarta/turbine/turbine-2.3/source/ and copied
> these into a clean directory. Then I ran maven, with no target (default is
> jar). I get
>
> ....
> generate-om:
>
>
>     [javac] Since fork is true, ignoring compiler setting.
>     [javac] Compiling 401 source files to
> C:\jakarta-turbine-2.3\target\classes
>     [javac] Since fork is true, ignoring compiler setting.
>     [javac]
> C:\jakarta-turbine-2.3\target\src\org\apache\turbine\modules\Actio
> nLoader.ja
> va:64: cannot resolve symbol
>     [javac] symbol  : class AssemblerBrokerService
>     [javac] location: package assemblerbroker
>     [javac] import
> org.apache.turbine.services.assemblerbroker.AssemblerBrokerService;
>     [javac]                                                    ^
>     [javac]
> C:\jakarta-turbine-2.3\target\src\org\apache\turbine\modules\Actio
> nLoader.ja
> va:65: cannot resolve symbol
>     [javac] symbol  : class TurbineAssemblerBroker
>     [javac] location: package assemblerbroker
>     [javac] import
> org.apache.turbine.services.assemblerbroker.TurbineAssemblerBroker;
>     [javac]                                                    ^
>     [javac]
> C:\jakarta-turbine-2.3\target\src\org\apache\turbine\modules\Actio
> nLoader.ja
> va:89: cannot resolve symbol
>     [javac] symbol  : class AssemblerBrokerService
>     [javac] location: class org.apache.turbine.modules.ActionLoader
>     [javac]     private static AssemblerBrokerService ab =
> TurbineAssemblerBroker.getService();
>     [javac]                    ^
>     [javac]
> C:\jakarta-turbine-2.3\target\src\org\apache\turbine\modules\Layou
> tLoader.ja
> va:65: cannot resolve symbol
>     [javac] symbol  : class AssemblerBrokerService
>     [javac] location: package assemblerbroker
>     [javac] import
> org.apache.turbine.services.assemblerbroker.AssemblerBrokerService;
>     [javac]                                                    ^
>     [javac]
> C:\jakarta-turbine-2.3\target\src\org\apache\turbine\modules\Layou
> tLoader.ja
> va:66: cannot resolve symbol
>     [javac] symbol  : class TurbineAssemblerBroker
>     [javac] location: package assemblerbroker
>     [javac] import
> org.apache.turbine.services.assemblerbroker.TurbineAssemblerBroker;
>     [javac]                                                    ^
>     [javac]
> C:\jakarta-turbine-2.3\target\src\org\apache\turbine\modules\Layou
> tLoader.ja
> va:93: cannot resolve symbol
>     [javac] symbol  : class AssemblerBrokerService
>     [javac] location: class org.apache.turbine.modules.LayoutLoader
>     [javac]     private static AssemblerBrokerService ab =
> TurbineAssemblerBroker.getService();
>     [javac]                    ^
>     [javac]
> C:\jakarta-turbine-2.3\target\src\org\apache\turbine\modules\Navig
> ationLoade
> r.java:66: cannot resolve symbol
>     [javac] symbol  : class AssemblerBrokerService
>     [javac] location: package assemblerbroker
>     [javac] import
> org.apache.turbine.services.assemblerbroker.AssemblerBrokerService;
>     [javac]                                                    ^
>     [javac]
> C:\jakarta-turbine-2.3\target\src\org\apache\turbine\modules\Navig
> ationLoade
> r.java:67: cannot resolve symbol
>     [javac] symbol  : class TurbineAssemblerBroker
>
> etc. up to 100 errors before it craps out. Just checked it again and it
> behaves exactly the same.
>
> Then I had a look and found that it had copied the entire src
> tree into the
> target tree.
>
> So then I pointed to the src but used the jar downloaded for JDK 1.4.2
> (which I have switched to from 1.4.1_01 to be able to use the ready built
> jar). Still no joy with my TorqueComponent.configure problem.
> Interestingly
> I have another directory with HEAD (2.4 dev) in it and it builds
> fine on the
> same PC.
>
> Just now I fixed the config for the Avalon Scheduler component and when I
> have both roles specified in roleConfigutration.xml and
> componentConfiguration.xml not only does the Scheduler component work so
> does TorqueComponent, why the change - I have no idea.
>
> Now I am the point where the Avalon components load and configure OK but I
> have exactly the same problem as Jurgen, see his email and my last one for
> details.
>
> That adds up to about 3 days work, bit at least I am closer now and know
> more about Avalon. I am on W2K server
>
> Thanks
>
> David
>
> > -----Original Message-----
> > From: Henning P. Schmiedehausen [mailto:[EMAIL PROTECTED]
> > Sent: 04 September 2003 13:18
> > To: [EMAIL PROTECTED]
> > Subject: Re: Torque as an Avalon Component [was: Re: Turbine Error]
> >
> >
> > "David Wynter" <[EMAIL PROTECTED]> writes:
> >
> > Could you please, at some point, tell us what exactly you're trying to
> > do? You postings are so vague that at last I simply don't understand
> > what you're trying to do how. So please tell us:
> >
> > - Your OS environment
> > - Your JDK
> > - Version of Maven that you're using
> > - What source base you're trying to compile
> > - How do you try to compile?
> > - How does the build fail (exact error message).
> >
> > As for the 2.3 release code:
> >
> > (RedHat Linux 9, JDK 1.4.2, maven-1.0-beta-9-SNAPSHOT)
> >
> > % cd /tmp
> > % wget
> > http://www.apache.org/dist/jakarta/turbine/turbine-2.3/source/jaka
> > rta-turbine-2.3.tar.gz
> > --13:51:31--
> > http://www.apache.org/dist/jakarta/turbine/turbine-2.3/source/jaka
> > rta-turbine-2.3.tar.gz
> >            => `jakarta-turbine-2.3.tar.gz'
> > Resolving www-cache.intermeta.de... done.
> > Connecting to www-cache.intermeta.de[192.168.2.3]:3128... connected.
> > Proxy request sent, awaiting response... 200 OK
> > Length: 1,164,296 [application/x-tar]
> >
> > 100%[=============================================================
> ==================================================================
> ==========
> ==============>] 1,164,296    128.68K/s    ETA > 00:00
> >
> > 13:51:40 (128.68 KB/s) - `jakarta-turbine-2.3.tar.gz' saved
> > [1164296/1164296]
> >
> > % tar xzf jakarta-turbine-2.3.tar.gz
> > % cd jakarta-turbine-2.3
> > % maven java:jar > & /tmp/logfile
> > % ls -la target/turbine-2.3.jar
> > -rw-r--r--    1 henning  users      764860 Sep  4 14:15
> > target/turbine-2.3.jar
> >
> > => This code definitely builds fine from the release archive.
> >
> >     Regards
> >             Henning
> >
> > --
> > Dipl.-Inf. (Univ.) Henning P. Schmiedehausen          INTERMETA GmbH
> > [EMAIL PROTECTED]        +49 9131 50 654 0   http://www.intermeta.de/
> >
> > Java, perl, Solaris, Linux, xSP Consulting, Web Services
> > freelance consultant -- Jakarta Turbine Development  -- hero for hire
> >
> > "Dominate!! Dominate!! Eat your young and aggregate! I have
> > grotty silicon!"
> >       -- AOL CD when played backwards  (User Friendly - 200-10-15)
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>


---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to