Hi, I've sort of tracked down my latest problem but don't know what I did to get there nor how to get back to where I was. I can issue the start-x.py from the command prompt and all works well, but when I start from supervisor it dies (I'm assuming) because it can no longer find /usr/lib/cgi-bin/tg-autostart.cgi I've been merrily (or not so merrily) upgrading based on what this list seems to recommend. I'm now at:
Cheetah-2.0.1-py2.4-linux-i686.egg TurboGears-1.0.4b6-py2.4.egg CherryPy-2.3.0-py2.4.egg TurboJson-1.1.2-py2.4.egg DecoratorTools-1.7-py2.4.egg TurboKid-1.0.4-py2.4.egg Elixir-0.5.0-py2.4.egg cElementTree-1.0.5_20051216-py2.4-linux-i686.egg FormEncode-0.9-py2.4.egg configobj-4.4.0-py2.4.egg Paste-1.6-py2.4.egg elementtree-1.2.7_20070827_preview-py2.4.egg PasteDeploy-1.3.1-py2.4.egg kid-0.9.6-py2.4.egg PasteScript-1.6.1.1-py2.4.egg nose-0.10.1-py2.4.egg PyProtocols-1.0a0-py2.4-linux-i686.egg setuptools-0.6c6-py2.4.egg RuleDispatch-0.5a0.dev_r2306-py2.4-linux-i686.egg setuptools-0.6c7-py2.4.egg SQLAlchemy-0.4.2-py2.4.egg simplejson-1.7.3-py2.4-linux-i686.egg SQLObject-0.9.2-py2.4.egg storm-0.11-py2.4.egg TurboCheetah-1.0-py2.4.egg -- Ubuntu Linux DC LoCo Washington, DC http://dc.ubuntu-us.org/ --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "TurboGears" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/turbogears?hl=en -~----------~----~----~----~------~----~------~--~---
