The problem was It seems the TG2 installer got setup tools 0.6, not 0.6c9 which is what's required. The debug now works properly and I've been able to patch my way around the problem. When I renamed "groups" to "roles" I configured TGAdmin and while it worked fine for all the other admin pages, the permissions page would still be looking for "groups". I was able to work around it by patching TGAdmin however I'm sure there has to be a better way to do it. I've spent several hours trying to get it to work and the docs nearly, but don't quite cover this.
Here's the diff if anyone could please suggest a better way. http://pastebin.com/0d42Wgae On May 3, 1:11 pm, William Chambers <[email protected]> wrote: > I'm going to be re-installing the virtualenv + setuptools and then > working through each change to try to identify exactly what is causing > the problem. Thanks for your help. > > William > > On May 3, 3:35 am, "Diez B. Roggisch" <[email protected]> wrote: > > > > > Have you visited the debug-screen? what happens there? > > > The problem with the traceback at hand is that it's useless. Not > > because of your fault, but apparently weberror tries to gather > > information for the traceback & fails doing so. I have no idea *what* > > makes it fail, so I can only suggest to try visit the debug-session & > > re-install the virtualenv including setuptools. > > > Diez -- You received this message because you are subscribed to the Google Groups "TurboGears" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/turbogears?hl=en.
