Well, I tried compliling it under Ubuntu and it isn't quite working.
Ubuntu starts out as a very basic install so in order to compile it, I had
to install not just Java, Ant, Svn, and Axis2C, but g++, make, automake, and
libtool.
It is also a debian based system so it uses apt instead of rpm for package
managment, so the command to check for libxml2 is "sudo apt-cache show
libxml2"
Anyhow, once that is all installed augen.sh runs fine, configure runs fine,
but make fails.
It might have to do with my gcc version which is 4.0.3
Here is a dump of make's output:
make all-recursive
make[1]: Entering directory `/home/dwheeler/tuscany/cpp/sdo'
Making all in runtime
make[2]: Entering directory `/home/dwheeler/tuscany/cpp/sdo/runtime'
Making all in core
make[3]: Entering directory `/home/dwheeler/tuscany/cpp/sdo/runtime/core'
Making all in src
make[4]: Entering directory
`/home/dwheeler/tuscany/cpp/sdo/runtime/core/src'
Making all in commonj
make[5]: Entering directory
`/home/dwheeler/tuscany/cpp/sdo/runtime/core/src/commonj'
Making all in sdo
make[6]: Entering directory
`/home/dwheeler/tuscany/cpp/sdo/runtime/core/src/commonj/sdo'
if /bin/sh ../../../../../libtool --tag=CXX --mode=compile g++
-DHAVE_CONFIG_H -I. -I. -I../../../../.. -I../ ../../../../runtime/core/src
-I -g -O2 -MT ChangedDataObjectListImpl.lo -MD -MP -MF
".deps/ChangedDataObje ctListImpl.Tpo" -c -o ChangedDataObjectListImpl.lo
ChangedDataObjectListImpl.cpp; \
then mv -f ".deps/ChangedDataObjectListImpl.Tpo"
".deps/ChangedDataObjectListImpl.Plo"; else rm -f ".
deps/ChangedDataObjectListImpl.Tpo"; exit 1; fi
mkdir .libs
g++ -DHAVE_CONFIG_H -I. -I. -I../../../../..
-I../../../../../runtime/core/src -I -g -O2 -MT ChangedDataObje
ctListImpl.lo -MD -MP -MF .deps/ChangedDataObjectListImpl.Tpo -c
ChangedDataObjectListImpl.cpp -fPIC -DPIC - o
.libs/ChangedDataObjectListImpl.o
In file included from
../../../../../runtime/core/src/commonj/sdo/ChangeSummaryImpl.h:30,
from
../../../../../runtime/core/src/commonj/sdo/DataObjectImpl.h:41,
from ChangedDataObjectListImpl.cpp:31:
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:26:30: error:
libxml/xmlstring.h: No such file or directory
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:45: error:
expected ',' or '...' before '*' token
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:45: error: ISO
C++ forbids declaration of 'xmlChar ' with no type
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:48: error:
expected ',' or '...' before '*' token
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:48: error: ISO
C++ forbids declaration of 'xmlChar ' with no type
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:48: error:
'commonj::sdo::SDOXMLString::SDOXMLStri ng(int)' cannot be overloaded
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:45: error: with
'commonj::sdo::SDOXMLString::SDOXM LString(int)'
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:57: error:
expected ',' or '...' before '*' token
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:57: error: ISO
C++ forbids declaration of 'xmlChar ' with no type
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:60: error:
expected ',' or '...' before '*' token
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:60: error: ISO
C++ forbids declaration of 'xmlChar ' with no type
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:67: error: ISO
C++ forbids declaration of 'type na me' with no type
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:67: error:
'operator const int' does not name a ty pe
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:83: error: ISO
C++ forbids declaration of 'xmlChar ' with no type
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:83: error:
expected ';' before '*' token
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h: In member
function 'commonj::sdo::SDOXMLString::o perator const char*() const':
../../../../../runtime/core/src/commonj/sdo/SDOXMLString.h:66: error:
'xmlForm' was not declared in this scop e
make[6]: *** [ChangedDataObjectListImpl.lo] Error 1
On 7/19/06, Jean-Sebastien Delfino <[EMAIL PROTECTED] > wrote:
I just finished setting up a Tuscany C++ development and build
environment on my Linux machine and thought it would be useful to share
the steps I went through.
I am using Redhat Linux Enterprise 4, but the same steps should work on
other Linux systems like Fedora Core or Ubuntu for example.
These steps take no more than 15 mns to complete, starting from scratch.
After you complete them you should be all set to build the Tuscany C++
runtime, and start contributing :)
From a shell prompt, create a $HOME/tuscany directory.
Install the following prerequisites:
* Subversion - SVN version 1.3.0 or later is good (most Linux distros
already include SVN).
* Ant and a Java JDK are required by the SCA code generation tool used
to generate proxies and wrappers for C++ components.
Download apache-ant-1.6.5-bin.tar.gz from
http://ant.apache.org/bindownload.cgi.
From $HOME/tuscany do tar xzf apache-ant-1.6.5-bin.tar.gz.
Configure your environment:
export ANT_HOME=$HOME/tuscany/apache-ant-1.6.5
PATH=$ANT_HOME/bin:$PATH
Download jdk-1_5_0_06-linux-i586.bin from
http://java.sun.com/j2se/1.5.0/download.jsp .
From $HOME/tuscany run jdk-1_5_0_06-linux-i586.bin, this will extract
the JDK in $HOME/tuscany/jdk1.5.0_06.
Configure your environment:
export JAVA_HOME=$HOME/tuscany/jdk1.5.0_06
PATH=$JAVA_HOME/bin:$PATH
* Libxml2 2.6.20 or later
Libxml2 is already in most Linux distros, just check that you have
version 2.6.20 or later (my RHEL4 system had an older version and I had
to upgrade it).
To see which version of libxml2 is installed on your system do rpm -aq |
grep libxml2.
Configure your environment:
export LIBXML2_LIB=/usr/lib
export LIBXML2_INCLUDE=/usr/include/libxml2
* Axis2C version 0.92
Download axis2c-bin-0.92-linux.tar.gz from http://ws.apache.org/axis2/c.
From $HOME/Tuscany do tar xzf axis2c-bin-0.92-linux.tar.gz, this will
install Axis2C in $HOME/Tuscany/axis2c-bin-0.92-linux.
Configure your environment:
export AXIS2C_HOME=$HOME/tuscany/axis2c- bin-0.92-linux
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$AXIS2C_HOME/lib
Download the Tuscany C++ code:
From $HOME/tuscany, do svn co
http://svn.apache.org/repos/asf/incubator/tuscany/cpp , this will check
out all the source code in $HOME/tuscany/cpp.
Configure your environment:
export TUSCANY_SCACPP=$HOME/tuscany/cpp/sca/deploy
export TUSCANY_SDOCPP=$HOME/tuscany/cpp/sdo/deploy
export
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$TUSCANY_SDOCPP/lib:$TUSCANY_SCACPP/lib
The builds use the GNU automake + configure tools, which nicely analyze
your environment and generate all the make files you need.
To build the SDO C++ runtime:
cd $HOME/tuscany/cpp/sdo
./autogen.sh
./configure --prefix=$TUSCANY_SDOCPP --enable-static=no
make
make install
cd $HOME/tuscany/cpp/sdo/samples
./autogen.sh
./configure --prefix=$TUSCANY_SDOCPP --enable-static=no
make
make install
Note: Tuscany already has build.sh scripts that do all of this for you,
but I wanted to use the individual commands to understand what was going
on at each step.
Also, when you make code changes in general you just run make and make
install and not the whole set of steps.
To run the the SDO test suite:
cd $HOME/tuscany/cpp/sdo
./sdotest.sh
To build the SCA C++ runtime:
cd $HOME/tuscany/cpp/sca
./autogen.sh
./configure --prefix=$TUSCANY_SCACPP --enable-static=no
make
make install
cd $HOME/tuscany/cpp/sdo/samples
./autogen.sh
./configure --prefix=$TUSCANY_SCACPP --enable-static=no
make
make install
To run the SCA runtime tests:
cd $HOME/tuscany/cpp/sdo
./scatest.sh
To run the SCA calculator sample:
cd $HOME/tuscany/cpp/sca/deploy/samples/Calculator/deploy/bin
./runclient.sh
Overall it was pretty simple. I hope these steps will help people set
their C++ build environment and come help us!
Could other people in the group try these steps in other environments
and see if they work for them?
Do we have similar steps for Windows?
--
Jean-Sebastien
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
