Hi, Jim.
Thanks for the prompt response. I'll be waiting for the fix to complete the
databinding integration story. If I can help here, please let me know.
What I meant "CompositeContext.locateService(<compositeReferenceName>) " is
to get a proxy against the composite reference directly and invoke it
instead of
going through a component reference (which is wired to the composite
reference). Basically, it is the case b) in the orginal note.
Thanks,
Raymond
----- Original Message -----
From: "Jim Marino" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Wednesday, September 20, 2006 12:03 AM
Subject: Re: How can we insert a DataBindingInterceptor for the outbound
wire of a composite-level reference?
On Sep 19, 2006, at 11:45 PM, Raymond Feng wrote:
Hi,
I raised a similar issue on this list before but I didn't get any
responses. When I debugged a test case from Rick today, I found it was
due to same problem.
Let's assume we have composite level reference with Axis2 web service
binding.
<reference name="RemoteInteropDocService">
<!-- interface.wsdl interface="http://soapinterop.org/
#wsdl.interface(DocTestPortType)"/ -->
<interface.java interface="org.soapinterop.DocTestPortType"/>
<binding.ws endpoint="http://soapinterop.org/#wsdl.endpoint
(interopDocSvc/interopDocPort)" location="wsdl/interopdoc.wsdl"/>
</reference>
Physically, there are two service contracts involved for this reference.
1) The interface declared in <interface.xxx>. I assume it's for the
inbound wiring. For example, you can have a reference at a component
being wired to this reference (
component.reference --> composite.reference).
2) The WSDL portType used by the <binding.ws>. It really defines the
contract for the outgoing request. With Axis2, AXIOM is the databinding.
If a portType is not declared for binding.ws, we should derive it from
the interface.xxx (Java2WSDL could be used for interface.java).
We may have two cases (SC: ServiceContract):
a) component.reference (SC1) --> composite.reference (SC2) --> Axis2 web
service (SC3)
b) composite.reference (SC2) --> Axis2 web service (SC3)
(CompositeContext.locateService(<compositeReferenceName>) is used to
make the invocation)
In case a), the DataBindingInterceptor will be added to the wire (to be
precise, SC1.outbound wire) if SC1 and SC2 require some mappings.
But we don't have a way to add a DataBindingInterceptor between SC2 and
SC3. As a result, case b) is failing (Rick's test case). I have tried to
do this in the BindingBuilder but it doesn't seem to be very
straightforward with the following observations.
1) Wires are created for Reference by the WireService after the
Reference instance is created by a builder.
2) No outbound wire is created for Reference.
3) WirePostProcessor is not triggered for case b).
One thing I can think of is to allow the builder to set an optional
outbound service contract for the Reference and the WireService will
create the outbound wire for Reference in this case. And the
TargetInvoker should be added to the outbound wire instead of inbound
wire. During connecting, the Connector will trigger the
WirePostProcessor to mediate the inbound wire and outbound wire. Then we
have a chance to add a DataBindingInterceptor to mediate SC2 and SC3.
On the issue of the outbound wire added to a composite reference you are
right, there should be one. I spoke to Ignacio about this since it
touches on some of the callback and composite reference work but since
I've been out, he should have the latest on if this was added in (I'm
guessing not). If not, I'm sure either he or I can look into doing that
over the next day or so. In any event, the only case I can think of where
we need a mediation "inside" a reference is when the interface is not
compatible with the binding WSDL.
One further question: what d you mean by
"CompositeContext.locateService(<compositeReferenceName>) is used to make
the invocation"?
Jim
Any thoughts?
Thanks,
Raymond
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
