Hi Nitin As soon as it boots from Ubuntu CD and you need to press "ESC" button so as to get the command prompt. Now you can run the command "live noapic" and press enter. Now will the Ubuntu live CD will boot it normally and it will bring the desktop. Now if you want to install it then there is a Install icon on the desktop else you can use the live CD for a trial.
Thanks Nand Kumar On 7/3/07, Nitin Karthy <[EMAIL PROTECTED]> wrote: > > Hi Nand, > > I saw your post on nabble that you had installed Ubuntu on V6211AU. I have > recently purchased a V6211AU as well and when I tried booting it up via the > Ubuntu Live CD (V7.04 and AMD64 bit variant), it hangs up on the hardware > check stage. The only difference in my configuration is that I have upgraded > RAM to 1G. Did yuo face this problem too? If yes, how did you solve this? > > I was able to find a workaround for this by botting up with boot > parameters 'noapic', 'nolapic' & 'noacpi', but from what I have read on the > net if you boot without APIC the benfits of having dual core wouldn't kick > in and I don't think that's good. Any thoughts? > > Thanks & Regards, > Nitin Karthy
