On Tue, 14 Oct 2008, Mukund Deshpande wrote: > hi saifi, > I have followed steps as you said but could'nt find any DHCP > option in network devices of Yast.Then i thought dsl might be what you > said,i have created it as follows > Yast-->Network devices-->dsl > under dsl > dsl devices-->add(activate device manually)--> > 1)PPoE mode > 2)Config network card (under this) > i)Global....Overview : unchanged > ii)HostName/DNS : nameservers added > iii)Routing : 192.168.1.1 > Next -->(Here i get an UI error when 'countries' option is selected) > -->custom providers selected then add-->username , password added. > Modify DNS when connected selected , Automatically Reconnect > also i provided nameservers here as you sent me and also above in > HostName/DNS...........Still i cannot connect can you tell me Whats the > problem???? > > - mukund >
Hi Mukund: DHCP option needs to be configured if you also configured PPoE on the BSNL router. My post discussed this configuration. Your mail seems to suggest that you are trying to configure PPoE on the OpenSuSe 11 system, which is also fine. In that case, you would need to setup DSL connection with the following attributes: . mode : PPoE . dns : bsnl name servers . routing : gateway info provided by bsnl . connect on demand . select custom providers, add userid and password Apply the settings through YaST. Now if you try to drive traffic, ping www.twincling.org it should work. Let us know how it goes. thanks Saifi.
