--- On Thu, 4/12/08, Saifi Khan <[EMAIL PROTECTED]> wrote: >From: Saifi Khan <[EMAIL PROTECTED]> >Subject: Re: [twincling] Centos stops responding >To: [email protected] >Date: Thursday, 4 December, 2008, 10:16 PM > >On Thu, 4 Dec 2008, Sandeep Kumbhar wrote: > > >> Hi >> >> I have installed a squid proxy server and i have 2 NIC's installed >> into my system, my system is an Atom processor with Intel original >> D945GCLF motherboard. >> >> I am able to configure the NIC which is on board but when i am >configuring >> the other NIC, the system stops responding. >> >> I have to restart the system, but then also the problem presist. >> what might be the problem. Need help for the same. >> >> Regards >> Sandeep A. Kumbhar >> > >Please try booting with a OpenSuSe 11.x or Gentoo LiveCD. >Ideally, if both the NIC cards are detected, the networking >sub-system will configure a bridge between the two interfaces >by default. > >The onboard LAN is Realtek and that would work ! >http://www.intel. com/Products/ Desktop/Motherbo ards/D945GCLF/ >D945GCLF- >overview. htm > >Can you post the output of lspci -vn command ? If it is too >long, please use http://twincling. pastebin. com/ to past the >contents and post a link here. > > >thanks >Saifi.
Hi I have solved the problem of system hang , i test the 2 NIC in other system and i found it faulty , it was not working properly and even sometimes not getting detected.I have installed a Dlink NIC and all is working fine . Regards Sandeep A. Kumbhar
