From: Venkatesh Yadav Abbarapu <venkatesh.abbar...@amd.com>
U-Boot configures the USB config object which enables power for
the IP, without this the linux usb driver won't work.
So add "usb start" as part of preboot command.
Fixes: dd4a82201694 ("arm64: zynqmp: Introduce kria SOM defconfig")
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbar...@amd.com>
Signed-off-by: Michal Simek <michal.si...@amd.com>
---
board/xilinx/zynqmp/zynqmp_kria.env | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/xilinx/zynqmp/zynqmp_kria.env
b/board/xilinx/zynqmp/zynqmp_kria.env
index 75b604a1f767..89f48c035863 100644
--- a/board/xilinx/zynqmp/zynqmp_kria.env
+++ b/board/xilinx/zynqmp/zynqmp_kria.env
@@ -42,7 +42,7 @@ script_offset_f=0x3e80000
script_size_f=0x80000
scriptaddr=0x20000000
usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run
scan_dev_for_boot_part; fi
-preboot=setenv boot_targets; setenv modeboot; run board_setup
+preboot=setenv boot_targets; setenv modeboot; run board_setup; usb start
usb_pgood_delay=1000
# SOM specific boot methods
--
2.43.0
