On Thu, May 22, 2025 at 9:48 AM <conor.doo...@microchip.com> wrote: > > On 22/05/2025 15:09, Eoin Dickson wrote: > > From: Eoin Dickson <eoin.dick...@microchip.com> > > > > This series add SD card support for the Beagle-V-Fire. The Beagle-V-Fire > > uses the > > Microchip coreqspi xfer function and a gpio chip select, so this series > > adds gpio > > support for PolarFire SoC and the xfer function into the Microchip coreqspi > > driver. > > > > Eoin Dickson (4): > > gpio: add PolarFire SoC GPIO and Core GPIO driver > > spi: coreqspi: add xfer function for PolarFire SoC > > > configs: beaglev_fire: Enable GPIO and MMC_SPI > > riscv: dts: microchip: enable gpio banks in Beagle-V Fire > > I think what you need/want gpio wise is already in dts/upstream/ > but the config you're citing here doesn't exist in upstream > yet, so in v2 either drop the beagle-v specific bits and just > include the driver stuff or else bring the whole beaglev support > along. The former might be a better option, since the platform > support portion probably needs a wee chat with the TI folks > about whther it goes with the "real" TI beagles or not.
What's easier for you guys? Sticking it under ./board/beagle/ in u-boot would be the way to go.. The TH1520 Beagle will also eventually be there.. Regards, -- Robert Nelson https://rcn-ee.com/
