Allows use of the Rockchip IO-domain driver in SPL to configure
the GPIO to match the voltage supplied by specific regulators
(e.g. "vcc_sdio").
Signed-off-by: Justin Klaassen <jus...@tidylabs.net>
Reviewed-by: Quentin Schulz <quentin.sch...@cherry.de>
---
(no changes since v3)
Changes in v3:
- Add depends on SPL_DM_REGULATOR
Changes in v2:
- Added separate patch for added CONFIG_SPL_ROCKCHIP_IODOMAIN Kconfig
drivers/misc/Kconfig | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index ffc5868c0dd..8b8f6309ada 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -114,6 +114,14 @@ config ROCKCHIP_IODOMAIN
for the IO-domain setting of the SoC to match the voltage supplied
by the regulators.
+config SPL_ROCKCHIP_IODOMAIN
+ bool "Rockchip IO-domain driver support in SPL"
+ depends on SPL_MISC && SPL_DM_REGULATOR && ARCH_ROCKCHIP
+ help
+ Enable support for IO-domains in Rockchip SoCs in SPL. It is necessary
+ for the IO-domain setting of the SoC to match the voltage supplied
+ by the regulators.
+
config SIFIVE_OTP
bool "SiFive eMemory OTP driver"
depends on MISC
--
2.45.3
