This command does not work as described in this doc, so replace it with a regular make with qcom_defconfig, as already used for other defconfigs.
Signed-off-by: Luca Weiss <luca.we...@fairphone.com> --- doc/board/qualcomm/board.rst | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/doc/board/qualcomm/board.rst b/doc/board/qualcomm/board.rst index 64427ba5be793978f54dd51c2b24e55fcd78ea8f..23159f2091daa0def4cd005c9e413aed6de7d4a7 100644 --- a/doc/board/qualcomm/board.rst +++ b/doc/board/qualcomm/board.rst @@ -23,10 +23,7 @@ Installation ------------ Build ^^^^^ - - $ ./tools/buildman/buildman -o .output qcom - -This will build ``.output/u-boot-nodtb.bin`` using the ``qcom_defconfig``. +We will build ``u-boot-nodtb.bin`` from the u-boot source tree. Generate FIT image (optional) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -81,9 +78,10 @@ Steps: - Build u-boot -As above:: +Use the following commands:: - ./tools/buildman/buildman -o .output qcom + make CROSS_COMPILE=aarch64-linux-gnu- O=.output qcom_defconfig + make CROSS_COMPILE=aarch64-linux-gnu- O=.output -j$(nproc) Or for db410c (and other boards not supported by the generic target):: -- 2.49.0
