From: Judith Mendez <j...@ti.com> The bootph-all flag was introduced in dt-schema (dtschema/schemas/bootph.yaml) to define node usage across different boot phases.
For eMMC and SD boot modes, voltage regulator nodes, io-expander nodes, gpio nodes, and MMC nodes need to be present in all boot stages, so add missing bootph-all phase flag to these nodes to support SD boot and eMMC boot. Signed-off-by: Judith Mendez <j...@ti.com> Reviewed-by: Moteen Shah <m-s...@ti.com> Link: https://lore.kernel.org/r/20250429151454.4160506-2...@ti.com Signed-off-by: Nishanth Menon <n...@ti.com> [ upstream commit: db3cd905b8c8cd40f15a34e30a225704bb8a2fcb ] (cherry picked from commit efc9013586bda11485bbc190592bd25d83d0c1bc) --- dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts | 12 ++++++++++++ dts/upstream/src/arm64/ti/k3-am62a7-sk.dts | 2 ++ 2 files changed, 14 insertions(+) diff --git a/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts b/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts index 8e9fc00a6b3c7459a360f9e1d6bbb60e68c460ab..aafdb90c0eb700b554c6c308be6c1732d0459a8c 100644 --- a/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts +++ b/dts/upstream/src/arm64/ti/k3-am62-lp-sk.dts @@ -69,6 +69,7 @@ gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; states = <1800000 0x0>, <3300000 0x1>; + bootph-all; }; }; @@ -77,12 +78,14 @@ pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ >; + bootph-all; }; main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */ >; + bootph-all; }; pmic_irq_pins_default: pmic-irq-default-pins { @@ -118,6 +121,7 @@ pinctrl-names = "default"; pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + bootph-all; }; exp2: gpio@23 { @@ -229,6 +233,14 @@ DVDD-supply = <&buck2_reg>; }; +&main_gpio0 { + bootph-all; +}; + +&main_gpio1 { + bootph-all; +}; + &gpmc0 { ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */ }; diff --git a/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts b/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts index a9557ee73b8311087db9ce9cd9596efb8bb8975d..22be41d46eb519917516fba5f2439bdb492c46f4 100644 --- a/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts +++ b/dts/upstream/src/arm64/ti/k3-am62a7-sk.dts @@ -313,6 +313,7 @@ AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ >; + bootph-all; }; main_mmc1_pins_default: main-mmc1-default-pins { @@ -634,6 +635,7 @@ pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; disable-wp; + bootph-all; }; &sdhci1 { -- 2.49.0
