[PATCH] drivers: net: phy: micrel: Try to get phy node from phy-handle

[Naresh Kumar Ravulapalli]

If phy node isn't found in ethernet-phy subnode, try to get it from
phy-handle. And when this fails, only then use Ethernet node. This
fix results in getting correct phy handle properties for the
phy node if defined.

Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapa...@altera.com>
---
 drivers/net/phy/micrel_ksz90x1.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/micrel_ksz90x1.c b/drivers/net/phy/micrel_ksz90x1.c
index ee8eae1efd9..a02dbe900b8 100644
--- a/drivers/net/phy/micrel_ksz90x1.c
+++ b/drivers/net/phy/micrel_ksz90x1.c
@@ -7,6 +7,7 @@
  * (C) 2012 NetModule AG, David Andrey, added KSZ9031
  * (C) Copyright 2017 Adaptrum, Inc.
  * Written by Alexandru Gagniuc <ale...@adaptrum.com> for Adaptrum, Inc.
+ * Copyright (C) 2025 Altera Corporation <www.altera.com>
  */
 #include <dm.h>
 #include <env.h>
@@ -110,6 +111,7 @@ static int ksz90x1_of_config_group(struct phy_device 
*phydev,
 {
        struct udevice *dev = phydev->dev;
        struct phy_driver *drv = phydev->drv;
+       struct ofnode_phandle_args phandle;
        int val[4];
        int i, changed = 0, offset, max;
        u16 regval = 0;
@@ -126,8 +128,14 @@ static int ksz90x1_of_config_group(struct phy_device 
*phydev,
        }
 
        if (!ofnode_valid(node)) {
-               /* No node found, look in the Ethernet node */
-               node = dev_ofnode(dev);
+               if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
+                                              &phandle)) {
+                       /* No phy-handle found, look in the Ethernet node */
+                       node = dev_ofnode(dev);
+               } else {
+                       /* phy-handle found */
+                       node = phandle.node;
+               }
        }
 
        for (i = 0; i < ofcfg->grpsz; i++) {
-- 
2.35.3